PAULI 2 GF OPTIMIZED OUTPUT FOR -20°C - 2 T8 LAMPS - CLASS 1 IMPERVIOUS TUBULAR LIGHT FITTING FOR USE IN LOW TEMPERATURES Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation Absolute imperviousness Favours a constant temperature in the light fitting No internal dust accumulation Maximum light output Adapted for pressure cleaning Mechanical assembly not sensitive to external mechanical and/or chemical aggression High resistance to shocks and corrosion Single piece casing, material and components selected to ensure long-term investment ELECTRICAL CLASS FIRE RESISTANCE Coex. polycarbonate/PMMA SHOCK RESISTANCE OPERATING TEMPERATURE • Ø133 mm crystal quality polycarbonate diffuser • Also available in coextruded polycarbonate/PMMA for agri-food environments • End caps 1/2 ring press-formed in 304L stainless steel (316L also available) • Gaskets moulded in EPDM Cable entry with cable gland(detachable plug available) • Possibility for a model with 2 cable entries (2 entries on the same cap) GEAR TRAY • Low loss compensated ferromagnetic gear unit (EEI B1) • Internal wiring with silicone isolation braided with glass fibre • Supplied with IRC85 4000K high output fluorescent tube(s) • White powder-coated plate acting as a reflector, equipped with 2 T8 fluorescent tubes (58W recommended) • Double casing system for fluorescent tubes • Reflector in mirror finish aluminium sheeting available INSTALLATION – MAINTENANCE • Connection to 3x2.5 mm2 disconnectable terminal block • Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360° orientation (available as a reinforced mode and/or with closure by HSHC screw) • Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray 1• 2-T8-lamp model extensive reflector at -20°C 2• 2-T8-lamp model without reflector at -20°C

MAIN REFERENCES Room temperature Variable centre distance DIFFUSER Coex. polycarbonate/PMMA diffuser CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 5 to 12 mm Cable Ø: 7 to 14 mm 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm OPTICS Extensive reflector DESCRIPTION OPTION CODE IMPORTANT INFORMATION: At low temperatures, it is recommended that you use the 58W fluorescent tube, as their intrinsic operating temperature is far higher than that of 36W tubes. At –20°C, the flux of tubes at turn-on is 30% less than the flux emitted after stabilisation. The optimal time...