PAULI 1 HT 80 T MAX. 80°C - 1 OR 2 T8 LAMPS - GLASS DIFFUSER IMPERVIOUS TUBULAR LIGHT FITTING FOR USE AT HIGH TEMPERATURES Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning Mechanical assembly not sensitive to external mechanical and/or chemical aggression Borosilicate glass: high resistance to corrosion, chemical agents and temperatures Single-piece housing, material and components selected to ensure long-term investment ELECTRICAL CLASS PROTECTION SHOCK RESISTANCE OPERATING TEMPERATURE • Ø100 borosilicate diffuser in the 1-lamp model, Ø135 in the 2-lamp model • End caps 1/2 ring press-formed in 304L stainless steel (316L also available) • Gaskets moulded in silicone • Cable entry with cable gland • Possibility for a model with 2 cable entries for looping-in (2 entries on the same cap) GEAR TRAY • White powder coated steel sheet gear tray • Low loss compensated ferromagnetic gear unit (EEI B1) • Internal wiring with silicone isolation braided with glass fibre • White powder-coated gear tray acting as a reflector for general diffused lighting • Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) INSTALLATION – MAINTENANCE • Connection to 3x2.5 mm2 disconnectable terminal block • Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360° orientation (available as a reinforced model and/or with closure by HSHC screw) • Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray 1• 1-T8-lamp model extensive reflector at +25°C 2• 1-T8-lamp model intensive reflector at +25°C 3• 2-T8-lamp model extensive reflector at +25°C

OPTION CODE FINISHINGS End caps and fixing straps in 316L stainless steel FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) DESCRIPTION DIFFICULT ENVIRONMENTS CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 5 to 12 mm Cable Ø: 7 to 14 mm 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm OPTICS Intensive reflector (1-lamp versions) Extensive reflector GEAR UNIT 5-point terminal block for phase balancing DESCRIPTION OPTION CODE SPECIAL APPLICATIONS Version 1 lamp 2 lamps NORMAL ENVIRONMENTS...