Lighting in ATEX zones LED
32Pages

THEY TRUST US ACETEX CHIMIE • ADISSEO • ADNATCO (Abu Dhabi National Tanker Company) • AIRBUS • BRITISH PETROLEUM • EURENCO • Grand Port Maritime de Dunkerque • MISC (Malaysia International Shipping Corporation Berhad) • PANSN (Port Atlantique Nantes Saint-Nazaire) • PERENCO • PETRONAS • QAPCO (Qatar Petrochemical Company) • SANOFI • TEREOS • TOTAL and others

In addition to compliance with the requirements of international standards, lighting areas classified as ATEX require luminaires designed according to strict criteria of robustness and sealing to withstand 1m mm IP extreme environments which typically have explosive atmospheres as well. Based on our experience 68 69K and our knowledge of the specific nature of our clients’ businesses (chemical, petrochemical, onshore and offshore installations, water treatment, etc.) our ATEX luminaire ranges have been designed specifically for this purpose. We guarantee quality and performance RESISTANT...

OUR COMMITMENT : TO WITHSTAND YOUR AGGRESSIVE ENVIRONMENT Conditions in ATEX environments are often aggressive for installations and equipment (corrosive saline environments, UV, etc.). These constraints result in premature deterioration of materials that could lead to the spontaneous breakage of equipment. For this reason SAMMODE, with more than 40 years of experience in the design and use of ATEX luminaires, offers a selection of materials for your applications. STAINLESS STEEL Sammode offers two grades of stainless steel: • 04L grade stainless steel suitable for most industrial 3...

PRINCIPLES OF CONSTRUCTION TO STAND THE TEST OF TIME Decades of experience and expertise have enabled us to develop design principles (tubular structure, single-piece housing, closure systems, fixing systems, axial clamping by stainless steel screws, etc.) all of which guarantee an absolute seal and foolproof mechanical construction. Our light fittings demonstrate all their qualities in demanding environments. LUMINAIRES FOR HARSH ENVIRONMENTS Luminaires installed in «harsh environments» can be exposed to strong and permanent vibration, environmental pollution by hydrocarbons, corrosion due...

definitions General lighting The high power of these products makes them especially suitable for lighting large areas with significant levels of illumination, acting as natural replacements for conventional fluorescent solutions (1 x 36 W, 2 x 36 W, etc). These products are specifically designed for operation over a wide temperature range (-40 °C to + 40 °C) without any difference in their service life. The selected LED technology guarantees immediate 100% light output and efficient operation even at very low temperatures. Task lighting Because of their small size, these product lines can...

ATEX lighting solutions that stand the test of time selection guide Product Normal environments Harsh environments GENERAL LIGHTING Normal environments Harsh environments task lighting

Géneral lighting Particularly powerful, these products help illuminate large spaces with significant levels of illumination. They are designed to act as replacements for a conventional fluorescent solutions (1 x 36 W, 2 x 36 W, etc.) , providing identical illumination with reduced energy consumption. Selection guide Product Glass diffuser Coextruded diffuser GENERAL LIGHTING Normal environments Harsh environments

ZONES 2, 21 AND 22 - EASY MAINTENANCE - General LIGHTING -20°C/40°C - LED - 2775 to 4625 LM JAMIN 100 EASY MAINTENANCE IMPERVIOUS TUBULAR LIGHT FITTING FOR EXPLOSIVE ENVIRONMENTS LED TECHNOLOGY Low in maintenance Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning EASY MAINTENANCE Easy opening...

Variable centre distance Entraxe variable MAIN REFERENCES COLOUR POWER VERSIONS WITH COEXTRUDED POLYCARBONATE / PMMA HOUSING Equivalent to 1x36W T8 24W 24W OPTIONS DESCRIPTION OPTION CODE CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 8-13 mm Cable Ø: 10-15 mm End caps and fixing straps in 316L stainless steel 113/213 116/216 113-1B 116-1B 1 or 2 cable glands in nickel-coated brass Cable Ø : 5-14 mm OPTION CODE 1 cable gland in black polyamide and 1 blind plug (Hole Ø : 20 mm) Cable Ø: 8-13 mm Cable Ø: 10-15 mm FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw* BRV...

ZONES 2, 21 AND 22 - EASY MAINTENANCE - General LIGHTING -20°C/40°C - LED - 5550 TO 9250 LM JAMIN 133 EASY MAINTENANCE IMPERVIOUS TUBULAR LIGHT FITTING FOR EXPLOSIVE ENVIRONMENTS LED TECHNOLOGY Low in maintenance Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning EASY MAINTENANCE Easy opening...

L Variable centre distance MAIN REFERENCES COLOUR POWER VERSIONS WITH COEXTRUDED POLYCARBONATE / PMMA HOUSING Equivalent to 2x36W T8 48W 48W OPTIONS DESCRIPTION OPTION CODE CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 8-13 mm Cable Ø: 10-15 mm End caps and fixing straps in 316L stainless steel 113/213 116/216 113-1B 116-1B 1 or 2 cable glands in nickel-coated brass Cable Ø : 5-14 mm OPTION CODE 1 cable gland in black polyamide and 1 blind plug (Hole Ø : 20 mm) Cable Ø: 8-13 mm Cable Ø: 10-15 mm FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw* BRV...

ZONES 2, 21 AND 22 - INCREASED RESISTANCE - General LIGHTING -20°C/40°C - LED – 2775 TO 4625 LM BOYLE 100 IMPERVIOUS tubular LIGHT FITTING FOR DIFFICult EXPLOSIVE ENVIRONMENTS LED TECHNOLOGY Low in maintenance Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST Mechanical assembly...