Catalogs >
Sammode >
Hutton 100 Task lighting

Hutton 100 Task lighting
8Pages

Catalog excerpts

Technical lighting since 1927 Compact ATEX low-temperature light fitting

HUTTON 100 ATEX LIGHTING The HUTTON 100 light fitting, certified for Zone 2 (gas) and Zones 21 and 22 (dust), uses protection mode “n”. ZONE CLASSIFICATION Gas and fumes Zone 0 Location where an explosive atmosphere consisting of a mixture of air with flammable substances in the form of gas, fumes or a mist is continuously present for long periods or frequently. Zone 20 Location where a hazardous explosive atmosphere in the form of a cloud of combustible dust is continuously present in the air for long periods or frequently. Zone 21 Location where a hazardous explosive atmosphere in the...

Open the catalog to page 2

LIGHTING IN DEMANDING EXPLOSIVE ATMOSPHERES THEY TRUST US: ACETEX CHIMIE, ADISSEO, ADNATCO (Abu Dhabi National Tanker Company), Airbus, BRITISH PETROLEUM, EURENCO, Grand Port Maritime de Dunkerque, MISC (Malaysia International Shipping Corporation Berhad), PANSN (Port Atlantique Nantes Saint-Nazaire), PERENCO, PETRONAS, QAPCO (Qatar Petrochemical Company), SANOFI, TEREOS, TOTAL, and others

Open the catalog to page 3

HUTTON 100 ATEX LIGHTING COMPACT ATEX LOW-TEMPERATURE LUMINAIRE ZONES 2, 21 and 22 In addition to compliance with the requirements of international standards, lighting in ATEX zones 1m IP requires fittings designed in accordance with strict robustness and sealing criteria to withstand the 68 69K harsh environments that generally come hand in hand with explosive atmospheres. Quite often, our products are installed within congested processes and are though difficult to reach. As a result of ourmm experience and knowledge of the details of our clients’ businesses (chemicals, petrochemicals,...

Open the catalog to page 4

OUR COMMITMENT : TO WITHSTAND YOUR AGGRESSIVE ENVIRONMENT CONSTRUCTION Installed in harsh environments, those luminaires can be exposed to strong and continuous vibrations in areas characterized by pollution from hydrocarbons, corrosion due to salt spray, abrasion etc. Decades of experience and know-how enabled us to perfect the construction principles which guarantee an absolute seal and foolproof mechanical resistance. Method of construction : Single-bloc housing with high mechanical and chemical resistance Long-term sealing maintained by axial screwing STAINLESS STEEL Sammode offers two...

Open the catalog to page 5

ZONES 2, 21 AND 22 - INCREASED RESISTANCE - TASK LIGHTING -40°C/40°C - LED – 1850 LM HUTTON 100 Compact impervious tubular luminaire for demanding explosive environments wide operating temperature range LED TECHNOLOGY Low in maintenance Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST...

Open the catalog to page 6

MAIN REFERENCE! VERSIONS WITH BOROSILICATE GLASS HOUSING VERSIONS WITH COEXTRUDED POLYCARBONATE / PMMA HOUSING OPTION CODE DESCRIPTION OPTION CODE CABLE ENTRIES 1 or 2 cable glands in black polyamide 1 cable gland in black polyamide and 1 blind plug (Hole 0 : 20 mm] 1 or 2 cable glands in nickel-coated brass End caps and fixing straps in 316L stainless steel MR Reinforced bolt-fitted fixing straps with HSHC screw* BRV ("Tamper-resistant Torx screw on request] Protective covers Option codes to be added or to replace the designation codes of main references, subject to the compatibility of...

Open the catalog to page 7

Sammode 24 rue des Amandiers, 75020 Paris, France T +33 (0)1 43 14 84 90 F +33 (0)1 47 00 59 29 www.sammode.com Photos : Rodrigo Rojas, Sammode • We reserve the right to make technical changes • © Sammode - 06/2015 – european area version

Open the catalog to page 8