Technical lighting since 1927 Impervious luminaire for ATEX zones with harsh environment

The BOYLE 133 light fitting, certified for Zone 2 (gas) and Zones 21 and 22 (dust), uses protection mode “n”. ZONE CLASSIFICATION Gas and fumes Zone 0 Location where an explosive atmosphere consisting of a mixture of air with flammable substances in the form of gas, fumes or a mist is continuously present for long periods or frequently. Zone 20 Location where a hazardous explosive atmosphere in the form of a cloud of combustible dust is continuously present in the air for long periods or frequently. Zone 21 Location where a hazardous explosive atmosphere in the form of a cloud of combustible...

ATEX LIGHTING IN HARSH ENVIRONMENTS THEY TRUST US: ACETEX CHIMIE, ADISSEO, ADNATCO (Abu Dhabi National Tanker Company), Airbus, BRITISH PETROLEUM, EURENCO, Grand Port Maritime de Dunkerque, MISC (Malaysia International Shipping Corporation Berhad), PANSN (Port Atlantique Nantes Saint-Nazaire), PERENCO, PETRONAS, QAPCO (Qatar Petrochemical Company), SANOFI, TEREOS, TOTAL, and others

BOYLE 133 ATEX LIGHTING IMPERVIOUS LUMINAIRE FOR ATEX ZONES WITH HARSH ENVIRONMENT- ZONES 2, 21 and 22 1m In addition to compliance withmm requirements of international standards, lighting in ATEX zones the requires fittings designed in accordance with strict robustness and sealing criteria to withstand the harsh environments that generally come hand in hand with explosive atmospheres. As a result of our experience and knowledge of the details of our clients’ businesses (chemicals, petrochemicals, dockside installations, water treatment, etc.) the BOYLE 133 luminaire range has 1m been designed...

OUR COMMITMENT : TO WITHSTAND YOUR AGGRESSIVE ENVIRONMENT CONSTRUCTION Installed in harsh environments, those luminaires can be exposed to strong and continuous vibrations in areas characterized by pollution from hydrocarbons, corrosion due to salt spray, abrasion etc. Decades of experience and know-how enabled us to perfect the construction principles which guarantee an absolute seal and foolproof mechanical resistance. Method of construction: Single-bloc housing with high mechanical and chemical resistance Long-term sealing maintained by axial screwing STAINLESS STEEL Sammode offers two grades...

ZONES 2, 21 AND 22 - INCREASED RESISTANCE - General LIGHTING -20°C/40°C - LED – 5550 TO 9250 LM BOYLE 133 IMPERVIOUS LIGHT FITTING FOR DIFFICULT EXPLOSIVE ENVIRONMENTS LED TECHNOLOGY Low in maintenance Instantaneous full light output on ignition over the entire temperature range of use Designed for repeated switching on and off TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360° orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST Mechanical assembly insensitive to external...

MAIN REFERENCES VERSIONS WITH BOROSILICATE GLASS HOUSING VERSIONS WITH COEXTRUDED POLYCARBONATE / PMMA HOUSING OPTION CODE DESCRIPTION CABLE ENTRIES 1 or 2 cable glands in black polyamide 1 cable gland in black polyamide and 1 blind plug (Hole 0 : 20 mm] 1 or 2 cable glands in nickel-coated brass GEAR UNITS 5-point terminal block for phase balancing C5P C5P OPTION CODE End caps and fixing straps in 316L stainless steel MR 116/216 Reinforced bolt-fitted fixing straps with HSHC screw* BRV ("Tamper-resistant Torx screw on request] Option codes to be added or to replace the designation codes of main...

Sammode 24 rue des Amandiers, 75020 Paris, France T +33 (0)1 43 14 84 90 F +33 (0)1 47 00 59 29 www.sammode.com Photos : Rodrigo Rojas, Sammode • Photo: Perenco • We reserve the right to make technical changes • © Sammode - 03/2015 – european area version