SAFE 25 Full Cabin Specifications / Features SAFE 25 Full Cabin Specifications: Length Overall (LOA) (Feet) Length Overall (Meters) Beam Overall (BOA) (Feet) Beam Overall (Meters) Deadrise at Transom (Degrees) Draft (Engine Trimmed Up) (Inches) Seated Positions Dry Weight: vessel, no engines, no fuel, no options, no liquids, no people, no cargo, (approximate) (lbs) Light Load: dry weight, weight of heaviest engines (lbs) Cargo/Personnel Capacity-Net- Gross minus weight of heaviest engines, weight of fuel, and options (lbs) Height on trailer - Road Transport (Feet) Length on trailer - Road Transport (Feet)

SAFE 25 Full Cabin Features: HULL & DECK 1/4” - 5086 bottom plate with SAFE Boats exclusive stringer system with angled transverse framing Pressure tested air tight hull Reinforced keel beaching plate Notched transom with speed shoe in bottom plate Performance wings below collars for increased lift and stabilization while maneuvering Fully welded performance lifting strakes Self bailing decks with high volume scupper drains Forward cockpit with self draining decks Bow storage/anchor locker with aft facing door Dual aft rigging locker system with topside access Sacrificial hull anode(s) SUPER...

TOWING, LIFTING & ATTACHMENT POINTS Six (6) 10" cast aluminum weld on cleats Bow and stern lifting eyes Weld on bow eye with dual SS inserts Weld on transom tie downs Fore and aft tow posts with single SS cross pin Motor guard/tow line guide ELECTRICAL SYSTEM & POWER GENERATION House battery system 12VDC - one (1) marine grade battery with switch Blue Sea 360 marine grade breaker system Backlit switch panel with marine grade switches Four (4) 12VDC power receptacles - two (2) on dash and two (2) on arch Self-parking intermittent windshield wiper system with washer LIGHTING LED navigation lights...