LightGuard Basic Catalogue Sheet

Product catalog summary

Overview: The document provides technical specifications and features of the LightGuard Basic, a compact remote monitoring unit designed for floating and fixed Aids to Navigation (AtoNs). It monitors light operation, identifies flash codes, and offers GPS synchronization.

Key Features:

Easy installation with a waterproof enclosure suitable for wall, rail, or mast mounting.
Lantern monitoring through current measurement.
Low power consumption and GPS synchronization for position monitoring.
Tilt monitoring and communication via GSM, ISatM2M, or AIS.
Integrated GPS and GSM antennas with digital I/Os for external equipment monitoring.

Main Technical Specifications:

Supply Voltage: 9-34 VDC
Power Consumption: Less than 3mA in standby mode
Digital Outputs: Three outputs with varying capacities for flash code, sync pulse, and status
Analogue Input: 0 - 34 VDC with 0.1% full scale accuracy
Current Input: +/- 10 A with 1% full scale accuracy
Temperature Range: -25 to 55 °C (storage up to 70 °C)
Degree of Protection: IP65
EMC Standards: EN50081-1, EN50081-2, EN50082-1

Product Variants:

LGB-GPS: Basic model with GPS for synchronization
LGB-GSM: Includes GPS and GSM modem for data transmission
LGB-ISAT: Features GPS and Inmarsat IsatM2M modem for data transmission
LGB-AIS1: GPS and AIS T1 for MSG 6/21 transmission on a fixed slot
LGB-AIS3: GPS and AIS T3 for MSG 6/21 transmission/reception on fixed or random slots

Contact Information: SABIK Informationssysteme GmbH, Hagenower Straße 73, 19061 Schwerin, Phone: +49(0)385 3993 706, Fax: +49(0)385 3993 390, Email: [email protected]

Catalog excerpts

Monitoring & Control LightGuard Basic LightGuard Basic is a compact remote monitoring outstation unit for floating and fixed AtoNs. The unit monitors light operation and identifies the flash code by measuring the light current. With the integrated GPS position monitoring, light synchronization is available. Additional digital input and analogue input can be used to monitor external equipment such as RACON, door switch or batteries. A digital power output can be used to control a light or even to generate the Flash code. ■ Mount on wall, rail or mast current measurement ■ Digital l/Os for external equipment E-Mail [email protected] Main Technical Specification Product Codes SABIK Informationssysteme GmbH • Phone +49-385-3993 395 • Fax +49-385-3993 390 • E-Mail [email protected] • WWW.SObik.COITI

Open the catalog to page 1

All Sabik Marine catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list