1. Catalogs
  2. Sabik Marine
  3. LightGuard AIS Catalogue Sheet

LightGuard AIS Catalogue Sheet

LightGuard AIS Catalogue Sheet

Product catalog summary
Overview: The document provides technical specifications and features of an AIS unit designed for Aids to Navigation (AtoN), suitable for both floating and fixed installations. It highlights compliance with international standards and its capabilities in transmitting and receiving navigation-related messages.
Specifications:
  • Compliant with IEC 62320-2, IALA A126, and IEC 60945 standards.
  • BSH approved with low power consumption of less than 0.4 Ah/day.
  • Supports VDL configuration and monitoring, providing reference points on RADAR and ECDIS.
  • Capable of synthetic and virtual transmissions, with Type 3 units supporting additional message types.
Main Technical Specifications:
  • Physical Dimensions: Height 134 mm, Width 127 mm, Depth 127 mm, Weight 1.6 kg.
  • Power Consumption: Continuous Mode at 12 VDC: 170 mW.
  • Data I/O: Bi-directional and Diagnostic I/O via RS232 at 38.4K BAUD.
  • Transmitter Performance: Frequency range 156.025 – 162.025 MHz, TX Power Control 1 – 12.5 W.
  • Receiver Performance: Two receivers, frequency range 156.025 – 162.025 MHz, dynamic range ≥ 1000 dB.
  • Environmental: Operating temperature range -25 to +55 °C, relative humidity 0 to 95%.
Technical Standards and Approvals:
  • Complies with IEC 60945 (exposed), ITU 1371-3, and IEC 62320-2.
  • Regulatory approval by BSH.
Additional Features: The unit supports monitoring and control functions, with the ability to transmit message 21 every 3 minutes in continuous mode.
See more

Catalog excerpts

LightGuard AIS Catalogue Sheet-1

fixed Aids to Navigation. The unit can either just transmit message 21 with AtoN status or it can together with LightGuard send and receive message 6 with monitoring ■ Fully compliant with ■ Low power consumption less than ■ For use on floating or fixed AtoN's ■ Provides reference points on a ship's RADAR and ECDIS ■ Provides status of the AtoN device, including battery life and light status Designed to support chaining and RATDMA (Type 3 configuration only) ■ Capable of supporting synthetic and virtual transmissions ■ Type 3 unit supports message 7 Main Technical Specification *Continuous Mode: AIS AtoN reports Message 21 every 3 minutes in accordance with ITU-R M. 1371 SABIK Informationssysteme GmbH E-Mail ¡[email protected]

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.