Marine Lanterns Marine LED light for buoys LED lantern commonly used on both fixed and floating configured with two different tiers depending on operational Standard IALA colours Red, Green, White, Yellow and ■ Rugged aluminium housing for installation in harsh marine consumption, suitable for solar ■ Integrated flasher with solar charger ■ Integrated solar panel charger using pulse width modulation ■ Adjustable intensity and range ■ Available with narrow (6°) or wide (10°) vertical divergence ■ Programming with wireless Remote monitoring Bird spikes Stainless steel as standard. Easy to replace. Special spikes for protection agains cormorants and other large birds on request. GPS unit and antenna integra- GSM unit and antenna integrated in the lantern for remote monito- Additional cable entry Equipped as standard with two cable entries. If the second entry is needed e.g. for a solar module standard M20 cable gland can communication with Sabik PDA Programmer to set fias code, range, photocell, switch level etc. The event log data is also reada- The bottom plate supports installation on structure with radius. The mounting holes are galvanic isolated with plastic isolators. PTFE breathing vent for pressure release. The optinal Optical Feedback System (OFBS) enables built-in over time. E-Mail [email protected] SABIK Informationssysteme GmbH E-Mail ¡[email protected]

Marine Lanterns Main Technical Specification LED 155 Main Technical Specification LED 155 B/Y S A B ! K SABIKOY . Phone +358-19-560 1 100 • Fax +358-19-560 1 120 • [email protected] Option matrix White 980127SMC White 980132SMC White 980133SMC Product code example: 980124SMC-N-1.9 ■ 980124 is Sabik code for a single tier LED 155 R ■ N is the code for a Narrow lens ■ 7 stands for the option 1 Optical feed back system ■ 9 indicates that option 2 Light Guard SMC is chosen Wreck marking lantern Option matrix LENS TYPE (DIVERGENCE) LED-155 BLUE/YELLOW WRECK MARK 980106 SABIK Informationssysteme...