PRODUCT INFORMATION INDUSTRIAL SECTORS Energy and heat supply Chemical industry ALL-ROUNDER FOR SPECIAL TASKS Refi neries Foods Steel and metal production The SSB swirl burner turns difficult-to-process by-products into valuable special fuels Waste incineration Building materials Wood processing Standard ships and offshore plants Lean substances and gases, liquids or dusts with a low heating value are often created as by-products in industrial production. Their thermal use, instead of expensive disposal, or their restricted use with the increased use of expensive supporting fuels such as natural gas or fuel oil, is a sensible measure from an economic as well as ecological perspective. SAACKE developed the internally designed steam assisted pressure jet atomizer precisely for this reason, the result: the SSB series (“SAACKE Swirl Burner”). It has now been supplemented by a tangential windbox. This swirls the combustion air more forcefully into the burner and enables a particularly short, stable flame to be used as well as the low-emission utilization of special fuels. MODULAR CONSTRUCTION AND INCREASED FLEXIBILITY Regardless of the fuel, all basic versions are already equipped with features required for reliable operation in process combustion. The SSB burner series is successfully used for boiler firing as well as in thermal processing and drying plants. They are ideally suited as pilot and support burners, such as in waste incineration plants. Their modular construction is specifically designed for upgrades or modernizations, while the utilization of a variety of fuels reflects their flexibility. ALL BENEFITS AT A GLANCE • Reliable utilization of liquids, gases and dusts with a low heat value without support firing • Saves on expensive standard fuels such as natural gas and light fuel oil • Particularly stable and short flame at low heat values; the flame length can be adjusted by a swirl vane • Under- and over-stoichiometric operation with lambda 0.3 - 4 • Broad control range • Reliability below the emission limits in operation with special fuels • Low-maintenance, thanks to the swirl burner technology © SAACKE GmbH SAACKE GmbH | Head Office in Bremen: Südweststrasse 13 | 28237 Bremen | Germany | Tel.: +49 421 6495 0 | Fax: +49 421 6495 5224 International contact details: www.saacke.com | [email protected]

PRODUCT INFORMATION SSB-LCG: RELIABLE UTILIZATION OF GASES WITH LOW HEAT VALUES The SSB-LCG reliably converts waste gases with extremely low heat values (such as blast-furnace or converter gases), virtually inert flue gases and even explosive vent gas-air mixtures into usable energy sources. A special muffle to introduce the gases is installed behind the burner, in which the super-critically swirled flame burns stably without support fuel. A higher heating value support fuel is only needed to reach the operating temperature. The temperature profile is extremely homogeneous, thanks to the optimal...