GAS COMBUSTION UNIT GCU SERIES TECHNICAL DATA SHEET Gas Combustion Unit GCU Series With its special design, the GCU combines all advantages of economic, operationally reliable and environmentally friendly combustion on sea. Key technical data: GCU Series Capacity Its most characteristic features are: • Rain-proof design to avoid corrosion and wearing of the GCU components, especially the burner and the combustion chamber bottom • The inner lining in the combustion chamber provides a cold and therefore strong structure of the GCU • High air excess provides low flame temperature for low heat radiation and low NO X emissions • No flame touching of the combustion chamber wall if the ship is rolling in heavy sea and therefore no wearing or damaging of the combustion chamber • No belt driven fans for low maintenance cost • Oil pilot burner for unlimited continuous operation if required during special circumstances • Controlled fuel air ratio for safe combustion and low emissions • For maintenance it is possible to remove or replace inner parts like combustion chamber and burner via funnel • Gap between combustion chamber and outhershell is accessible • 100 % free fl ow possible • All gases are completely burned © SAACKE GmbH SAACKE GmbH | Head Office in Bremen: Südweststrasse 13 | 28237 Bremen | Germany | Tel.: +49 421 6495 0 | Fax: +49 421 6495 5224 International contact details: www.saacke.com | [email protected] 0-0750-0057-02

-TECHNICAL DATA SHEET - (SAACKE) 1 Details and other sizes on demand 2 Including insulation SAACKE GmbH | Head Office in Bremen: Siidweststrasse 13 | 28237 Bremen | Germany | Tel.: +49 421 6495 0 | Fax: +49 421 6495 5224 International contact details: www.saacke.com | [email protected]