*mynauticexpo

Catalogs
SAACKE
14_PB_FMB-VD

14_PB_FMB-VD

Product catalog summary

Design Features
The FMB-VD is a top-fired D-type boiler featuring a classic membrane wall furnace design, optimized for marine applications. It utilizes radiation heat transfer in the furnace and convection heat transfer through special pin tubes, which offer high heat transfer capacity. The boiler is highly efficient, especially under part-load conditions, and includes steam soot blowers for cleaning the convection part. Natural water circulation is ensured by external downcomers, and the boiler is primarily designed for saturated steam production but can be equipped with superheaters.

Specifications

Capacity: 30 - 110 t/h
Design Pressure: Up to 2.5 MPa (adaptable to customer requirements)

Dimensions and Weight
The boiler's dimensions and weight vary with capacity, ranging from 30 t/h to 110 t/h. For example, a 30 t/h boiler has dimensions of 3230 mm (A), 3370 mm (B), 8100 mm (C), 1600 mm (D), and 5250 mm (E), with a dry weight of 27,100 kg and a water volume of 8.1 m³ at NWL. The largest model, 110 t/h, has dimensions of 6110 mm (A), 5290 mm (B), 11950 mm (C), 2100 mm (D), and 8450 mm (E), with a dry weight of 81,000 kg and a water volume of 25.3 m³ at NWL.

Contact Information
SAACKE GmbH, Südweststrasse 13, 28237 Bremen, Germany. Phone: +49 - 421 - 64 95 0. Email: [email protected]. Website: www.saacke-marine-systems.com

Catalog excerpts

Fired Marine Boiler * can be adapted to customers request Design Features The top fired D-type boiler FMB-VD resembles a classic membrane wall furnace design, which is well proven for marine applications. The radiation heat transfer is performed in the furnace. The convection part is built up with special pin tubes, each with a high heat transfer capacity. Due to the extended heating surface a very high efficiency is given under part-load conditions. The convection part can be cleaned by means of steam soot blowers. This water tube boiler has an effective natural water circulation ensured in all areas of the boiler by means of the external downcomers. The FMB-VD boiler is basically designed for the production of saturated steam, but can also be equipped with superheaters. MARINE SYSTEMS heat generating plants

Open the catalog to page 1

* including insulation ** including insulation, refractory, valves and recommended burner [*-f iT'TH A =f MARINE SYSTEMS SAACKE GmbH ■ Siidweststrasse 13 ■ 28237 Bremen ■ Germany ■ Phone: +49 - 421 - 64 95 0 ■ eMail: [email protected]

Open the catalog to page 2

All SAACKE catalogs and brochures

Archived catalogs

09_PB_CMB-HF
2 Pages
20_PB_FMW-VD
2 Pages
System_Progress
32 Pages