Diver hot water machine Ordering informa on Diver hot water machine, 400 V, 50 Hz Diver hot water machine, 400 V, 60 Hz Diver hot water machine, 440 V, 60 Hz Diver hot water machine, 440 V, 50 Hz The Diver Hot Water Machine consists of two main parts: the pump unit and the heater unit. The pump unit and heater unit are controlled via the control panel on the unit. The heater unit can supply hot water for three divers wearing hot water suits. If there is no waterflow, the pump and heater will be switched off to avoid damage to the pump and heater unit. The unit has five hea ng element groups. One group is switched automa cally. The other four groups are controlled by switches. The pre-set outlet water temperature is 38°C. The temperature is displayed on the control panel. Simple temperature control, and limit value monitoring. The required pump water supply is +1.0 - +4.0 bar, 0 - 50 litres/ min. A total of four displays are used in the Hot Water Machine. Only three are visible on the frontpanel. • Maximum thermostat Jumo Ecotron (not visible on frontpanel) • Pump Pressure read-out, 0-40 bar • Water Flow, 0-48 liters/min • Water Temper

Specifica ons Power supply Frequency Upper heat unit Power consump on Insulal on class Weight Dimensions (HxWxD) Lower pump unit Weight Dimensions (HxWxD) Pump Weight Dimensions (HxWxD) Inlet Pressure Range: Flow Pressure Range RPM Inlet Pressure Range 24 kg 438 x 330 x 188 mm Flooded to 4.9 bar 15.6 gpm (59 l/m) 100 to 1500 psi (7 to 105 bar) 1450 rpm Flooded to 70 psi (Flooded to 4.9 bar) All rights reserved. Reproduc on in any form or by any means is not allowed, without prior permission in wri ng from IHC Hytech BV Pump (stainless steel) Superior design triplex plunger design provides smoother...