Catalog excerpts
Ordering information CO2 Scrubber pre-set version CO2 Scrubber external speed version CO2 Scrubber Aisi pre-set version CO2 Scrubber Aisi external speed version Parts Contraconnector Sofnolime (Sodalime): CO2 absorbent Scrubber cannister Scrubber motor Optional Power supply with fan speed control unit 3.80.1019 The CO2 scrubber unit is designed to remove CO2 from the atmosphere in hyperbaric chambers. An induced flow fan pulls the gas through the cannister. This is filled with sodalime which absorbs the CO2. Due to the efficient design, one scrubber is capable of serving eight persons for more than 6 hours in a chamber with adequate gas circulation. The fan motor is an IHC Hytech design which has completely potted stator electronics. This will protect the motor from different environmental conditions such as raised oxygen levels, humidity and pressure. The motor is reliable and maintenance free, because of its brushless design. The canister can hold approx 7.5 kg (16.5 lbs) of CO2 absorbent and is connected to the motor by a bayonet locking mechanism for easy replacement. The canister has been provided with a internal meshrate of 0.3 mm to keep in the smallest grains. Also a sodalime with a partical size of 1-2 mm can be used in the scrubber to minimise dust forming and increase duration of the sodalime to reduces costs.
Open the catalog to page 1
Weight in kg (lbs.) Complete unit (empty canister) 8.3 (18.3) Complete unit (full canister) 16 (35.3) Power Supply Rotating speed (without canister, atmospheric pressure) Operating pressure * = The maximum operating pressure depends on the gas mixture of the atmosphere. For compressed air, the maximum operating pressure is 10 bar. Adding helium to the mix allows increase of the maximum operating pressure accordings to the graph on the right. All rights reserved. Reproduction in any form or by any means is not allowed, without prior permission in writing from IHC Merwede BV IHC Hytech BV...
Open the catalog to page 2All Royal IHC catalogs and brochures
-
CABLELAYING VESSEL2 Pages
-
SOV T38-142 Pages
-
DMC 14502 Pages
-
SEVEN OCEANS7 Pages
-
Delta Multi Craft 12002 Pages
-
REFERENCES Custom built8 Pages
-
IHC BEAVER® 302 Pages
-
REFERENCES Hopper dredgers11 Pages
-
IHC Systems8 Pages
-
BOLD ENDEAVOUR2 Pages
-
SOVEREIGN2 Pages
-
TSHD IHC EASYDREDGE®2 Pages
-
TSHD IHC BEAGLE®2 Pages
-
IHC Beaver® 65 DDSP2 Pages
-
IHC Beaver® 502 Pages
-
IHC Beaver® 452 Pages
-
IHC Beaver® 402 Pages
-
IHC Beaver® 300 SE2 Pages
-
Delta Multi Craft 10502 Pages
-
OLEG STRASHNOV2 Pages
-
Diving support9 Pages
-
Pipelaying8 Pages
-
Seven Waves3 Pages
-
IHC Insight Pipelaying19 Pages
-
Sapura Diamante6 Pages
-
Diver hot water machine2 Pages
-
Double heat exchanger2 Pages
-
Single heat exchanger2 Pages
-
Hyperbreeze IV Scrubber1 Pages
-
Contamination canister2 Pages
-
Scrubber/heater motor2 Pages
-
Umbilical storage1 Pages
-
Various Frame for gasbottles1 Pages
-
Spare air Filling unit1 Pages
-
QMS2 Pages
-
Mobile diver unit (MDU)1 Pages
-
flyer construction2 Pages
-
bro-d5-flyer_offshore2 Pages
-
IHC Metalix2 Pages
-
Subsea Seperator System2 Pages
-
Delta Escort Tug2 Pages
-
Hi-Traq2 Pages
-
T38-142 Pages
-
SOV T60-182 Pages
-
Mining Brochure8 Pages
-
Module Handling System2 Pages
-
Easydredge2 Pages
-
Offshore Brochure10 Pages
-
FPSO Brochure2 Pages
-
Pipelay Brochure8 Pages
-
Offshore Wind4 Pages
-
Beaver® 652 Pages
-
Beaver® 502 Pages
-
Beaver® 452 Pages
-
Beaver® 402 Pages
-
Dredging10 Pages
-
Corporate Profile2 Pages
-
Beaver Series2 Pages
-
IHC Beagle® 82 Pages
-
IHC Beagle® 42 Pages
