Inflatable Fenders Who wants to damage their boat docking at the berth. Protect your pride & joy with inflatable Fenders for boats.

Inception 2019 Auckland, New Zealand. New marina, new boat. 3 knot outgoing tide and unexpected wind. Unfortunate collision with dock - scratched gel coat port side. Unimpressed with my efforts I looked for a better option. Options included PVC covered foam or had plastic fenders. There had to be a better alternative as hanging fenders from the hand rails was not appealing considering they needed to be stowed when underway. 2 am, a concept sprung to mind, inflatable fenders hung horizontally, fixed Permanently to the dock side, clear of the water. (no algal growth to boot). 2019 model fenders...

Quality materials and components Highest quality components including * 316 stainless steel D - Rings. FABRICS, WHAT IS PVC: The best impregnating material of inflatable boats is high-tech Polyvinyl chloride. It has excellent performance characteristics with features high resistance to mechanical wear, ultraviolet and temperature changes. It well resists humidity, pH of fresh and salt water as well as other substances. Boats made of PVC are stronger and lighter than rubber analogues. FABRICS, WHAT IS *TPU: While there are innumerable polymers on the market and each has its strengths, TPU coatings...

Slimline Dock Fenders FEATURING: 1.2 mm Grey PVC coated fabric with fully welded seams. Drop stitch paddle board construction. 1 x 260 mm EVA side panel - boat side. 316 marine grade stainless steel D - Rings. EXCLUDES: Fixing kits*. See page 10. Sits clear of the water Waterproof valves Slimline Series DOCK Fenders PRODUCT CODE Inflation valves Internal baffle

Protector Dock Fenders FEATURING: 1.2 mm Grey PVC coated fabric with fully welded seams. 1 x 200 mm side panel - boat side. 316 marine grade stainless steel D - Rings. EXCLUDES: Fixing kits*. See page 10. Sits clear of the water Waterproof valves Protector Series DOCK Fenders PRODUCT CODE Inflation valves Internal baffle

Protector Dock Fender Covers FEATURING: 3 mm Neoprene. Sewn ends. Anti tear edging around D - Ring holes. Anti tear around D - Ring Sewn ends Protector Series DOCK Fenders PRODUCT CODE Inflation valves Internal baffle

Slimline Boat Fenders FEATURING: 1.2 mm White PVC coated fabric with fully welded seams. Drop stitch paddle board construction. Blue or black EVA side panel - boat side. 8 x 316 marine grade stainless steel D - Rings. EXCLUDES: Fixing kits*. See page 10.

Stacker Boat Fenders FEATURING: Clip two together and double the thickness to 400mm with any of the Slimline Boat Fenders. Simply order another fender and a fixing kit. EXCLUDES: Fixing kits*. See page 10. Boat Fender Kits Slimline BOAT Fenders PRODUCT CODE Waterproof valves SBF600R Round SBF600S Square SBF600REC Rectangle SBF1000REC Rectangle Inflation valves Larger sizes available on request. Email: [email protected] 8

Selection guide Vessel Positioning MEASURE THE HEIGHT ABOVE THE WATER: STEP & REPEAT DISTANCES FOR FENDERS: For 350 mm - 390 mm. Select Protector 350 mm or Slimline fenders. WOODEN BATTEN (typicality (100 mm). WOODEN EDGE (typically 200 mm). PVC EDGING (typically 40 mm). Boat on dock fenders Typical 12m Berth / Vessel out from dock: For 400 mm - 500 mm. Select Protector 350 mm or 450 mm fenders. FLOATING DOCK FINGER Slimline 200 x 300 WATER LINE wood edging on side of berth WATER LINE Boat vs Fender Positioning Fender covers would be ideal with this type of installation. FLOATING DOCK FINGER...

safe2dock Fixing Kits for Docks & Boats FENDER ROPE FIXING KITS ARE OPTIONAL EXTRAS Manual foot pump: Slimline dock fender kit includes: Protector dock fender kits includes: High capacity. Slimline boat fender kit includes: Dock Fender Kits Boat Fender Kits

Quantity Guide Protector & Slimline Dock Fenders PROTECTOR DOCK FENDERS Diameters 350 mm / 450 mm. Step and Repeat distances 600 mm between end D - Rings. SLIMLINE DOCK FENDERS Sizes 200 mm x 300 mm .Step and Repeat distances 500 mm between end D - Rings. DOCK SIDE - Protector Fenders: 1m / 1.5m / 3.0m / 6.0m STERN DOCK SIDE - Slimline Fenders: 1m / 1.5m / 3.0m NOTE: The above quantities are estimates only. Please check your dock, berth or slip before ordering to ensure the correct quantities. Fenders are designed to press against the side of the dock. (clear of the water). Generally 200 mm wide...

Installation Guide for Protector & Slimline Dock Fenders Secure fender. For safety with rope and tie to dock side. Fixing kits. For Protector and Slimline fenders are sold separately. 1 x set per fender. Unpack Fender. Lay fender flat, D - Ring side up with rings facing towards the boat. Attach swivel shackles. Attach to D - Rings. Shackle pin facing up. Attach half saddles. Fix half saddles in position. 65mm from edge. Flip fender over onto its back. Twist and release valves so they are closed. Fixing points. 3000 mm Protector fenders have 5 x fixing points ( 2 x being spare). Unscrew one shackle...

Contact Details Roberts Brothers International Ltd 51 Voyager Drive. Gulf Harbour, Whangaparora. Auckland 0930. New Zealand. Email: [email protected] Website: www.safe2dock.com Phone: +64 27 250 3008 with a passion for boating Copyright safe2dock August 2023 1