Gear PUMP unitS R95

Product catalog summary

Overview: The document provides technical specifications and details for RICKMEIER gear pump units, specifically the R95 model. It includes information on standard pumps, motor designs, and various configurations available for different applications.

Specifications: The R95 gear pump units are equipped with three-phase asynchronous motors compliant with DIN EN 50347 standards. The document lists various motor outputs, flow rates, and pressures for a kinematic viscosity of 33 mm²/s at a speed of 1450 rpm. It also provides a table (Table 1) detailing the displacement volume, flow rate, maximum permissible differential pressure, motor size, output, and weight for different configurations.

Procedures and Recommendations: The document emphasizes the importance of adhering to operating manuals and product instructions during assembly, operation, and maintenance. It notes that technical data, product range, and availability are subject to change.

Dimensions and Design: Table 2 provides dimensions for the R95 model, including various design configurations such as IM B35, IM B5 with unit support, and IM V1/B5. The document specifies that dimensions not standardized under DIN EN 50347 relate to RICKMEIER's standard brand, with special manufacturers available upon request.

Key Data from Tables: Table 1 outlines the specifications for different motor sizes and configurations, including flow rates and pressures. Table 2 provides detailed dimensions for the R95 model, including flange sizes and connections for suction and pressure sides.

Additional Information: The document mentions that gear pump units can be equipped with DC motors upon request and provides contact information for RICKMEIER GmbH for further inquiries.

Catalog excerpts

Zahnradpumpen Ventile Sonderprodukte Système RICKMEIER GmbH E-Mail [email protected] Die technischen Angaben in diesem Katalog dienen der allgemeinen In- formation. Bei Montage, Betrieb und Wartung sind die Betriebsanleitungen gebenen Hinweise unbedingt zu be- achten. Ànderungen der technischen Daten, Auswahl- und Bestelldaten, beim Zubehör und der Lieferbarkeit sind vor- behalten. Alle Abmessungen in diesem Katalog gelten in Millimeter. The technical details in this catalog have been provided for general information. For any assembly, operation or servicing do respect the operating manuals and ducts. Technical data, product range and order data, accessories and availability are subject to alteration. All dimensions in this catalog are in millimetres. Auf Anfrage sind auch Gleichstrommotoren verse hie de nster Spannungsebenen erhàlt-lich. Zur Auswahl des für Ihren Anwendungsfall passenden Aggregats können S ie die rechtsstehende Tabelle 1 verwenden. Die in den MaRtabellen angegebenen Motor- marie, die nicht in DIN EN 50347 genormt sind: beziehen sich auf unser Standard-fab ri kat (spezieIIe Hersteller sind auf Anfrage erhàltlich). In Tabelle 1 finden Sie die zu den Förderströmen gehörigen Motorleistungen bei Drehzahlen können die Förderströme nahemngsweise propor-tional umgerechnet werden. Die zum gewàhiten Aggregat gehörigen Abmessungen finden Sie auf den folgenden beiden Seiten in der Zeile, auf die rechts inTabelle 1 verwiesen wird. Gear pump units RICKMEIER motor gear pump units are equipped with three-phase asynchronous motors under DIN EN 50347. When so requested d.c. motors are available at different voltages. To select the motor that fits for your application please refer to table 1 on the right- hand side. The dimensions of the motors specified in the table of dimensions, which have not been standardised under the DIN EN 50347, relate to our standard brand (special manufactures are available on request).ln table 1 you will find the motor outputs relating to the specified outlet pressures and flow rates for a kinematic viscosity of the flow medium of 33 mrrf/s and a 9 to convert the flow rates approximately proportional to speed. You will find the dimensions for the selected unit on the following two pages in the line that has been referred to in table 1 on the right-hand side. 1 : Übersicht R95 (Drehzahl 1450 1/min, kinematische Viskositat 33 n R95 overview (speed 1450 rpm, kinematic viscosity 33 mrrf/s) 1) Standard pump e oline Ventil, Motorbauform IM B35: Mehrgewicht für DB- bzw GLRD-Ausïührung siehe zugehöriges Pumpendatenblatt) I) Standardpump without valve, motordesign IM B35:excess weightfor DB - respectively GLRD-version p.r.t. pertaining pump data sheet

Open the catalog to page 1

with unit support Senkung fiir cheese head screws

Open the catalog to page 2

Gear PUMP unitS R95

Gear PUMP unitS R95

Catalog excerpts

All Rickmeier catalogs and brochures