Gear PUMP unitR35

Product catalog summary

Overview: This document provides technical specifications and guidelines for RICKMEIER gear pump units, focusing on standard pumps without valves and motor designs. It includes details on motor configurations, dimensions, and recommendations for specific applications.

Specifications: The standard pump is designed without a valve and uses a motor design IM B35. The document specifies the excess weight for DB and GLRD versions, which can be found in the corresponding pump data sheet. The gear pump units are equipped with three-phase asynchronous motors according to DIN EN 50347, with options for single-phase or DC motors upon request.

Procedures: For assembly, operation, and maintenance, it is crucial to follow the operating manuals and product instructions. The document emphasizes the importance of adhering to these guidelines to ensure proper functioning and safety.

Technical Data: Table 1 provides an overview of the R35 pump specifications, including speed (1450 rpm) and kinematic viscosity (33 mm²/s). The table lists motor outputs, outlet pressures, and flow rates. For different speeds, flow rates can be adjusted proportionally.

Recommendations: For applications with specific vibrating stresses, such as rail or ship use, a heavy-duty design for the unit support is recommended. This may alter the hole pattern for support attachment, and dimensions can be provided upon request.

Dimensions: Table 2 outlines the dimensions for the R35 pump units, including various design configurations and tolerances. It also provides details on the suction and pressure side connections.

Additional Information: The document notes that technical data, product range, and availability are subject to change. All dimensions are provided in millimeters, and specific manufacturer details are available upon request.

Catalog excerpts

Zahnradpumpen Ventile Sonderprodukte Système RICKMEIER GmbH KHiioj .Jiíiiwi ¿wr ifgnnan«n In- formation. Bei Montage, Betrieb und Wartung sind die Betriebsanleitungen gebenen Hinweise unbedingt zu be- achten. Ànderungen der technischen Daten, Auswahl- und Bestelldaten, beim Zubehör und der Lieferbarkeit sind vor- behalten. Alle Abmessungen in diesem Katalog gelten in Millimeter. The technical details in this catalog have been provided for general information. For any assembly, operation or servicing do respect the operating manuals and ducts. Technical data, product range and order data, accessories and availability are subject to alteration. All dimensions in this catalog are in millimetres. Auf Anfrage sind auch Einphasen-Wechsel- strommotoren sowie Gleichstrommotoren ver- Auswahl des für Ihren Anwendungsfall passen- den Aggregats können Sie die rechtsstehende beziehen sich auf unser Standardfabrikat (spe- zielle Hersteller sind auf Anfrage erhàltlich). In Tabelle 1 finden Sie die zu den angegebenen Austrittsdrücken und Förderströmen gehörigen Motorleistungen bei einer kinematischen Vis- kositàt des Fördermediums von 33 mnf/s und einer Drehzahl von 1450 1/min. Für abwei- chende Drehzahlen können die Förderströme nàherungsweise proportional umgerechnet werden. Die zum gewàhlten Aggregai gehö- rigen Abmessungen finden Sie auf den folgen- den beiden Seiten in der Zeile, auf die rechts in Tabelle 1 verwiesen wird. Für Bahn-, Schiffs- Oder andere Anwendungen die schwere Bauform. Hierdurch àndert sich das Bohrbild der FuRbefestigung, Abmes- Gear pump units RICKMEIER motor gear pump units as a standard are equipped with three-phase asyn- chronous motors under DIN EN 50347. When so requested, single-phase a.c. motors ord.c. motors are available at different voltages. To select the motor that fits for your application please referto table 1 on the right-hand side. The dimensions of the motors specified in the table of dimensions, which have not been standardised under the DIN EN 50347, relate to our standard brand (special manufactures are available on request). In table 1 you will find the < motor outputs relating to the specified outlet pressures and flow rates for a kinematic I viscosity of the flow medium of 33 mnf/s and a speed of 1450 rpm. For different numbers of revolutions it is possible to convert the flow rates ' approximately proportional to speed. You will ' find the dimensions for the selected unit on the , following two pages in the line that has been referred to in table 1 on the right-hand side. For rail, ship or other applications with specific I vibrating stresses we recommend a heavy duty design for the unit support. This will result in changes of the hole pattern for the support attachment. Dimensions can be provided on Tabelle 1 : Übersicht R35 (Drehzahl 1450 1/min, kinematische Viskositât 33 mm /s) table 1: R35 overview (speed 1450 rpm, kinematic viscosity 33 mrrf/s) 1) Standard pu m pe oline Ventil, Motorbauform IM B35: Mehrgewicht für DB- bzw. GLRD-Ausführung siehe zugehöriges Purnpendatenblatt I j standard pump without valve, motor design IM B35. excess weight for DB - respectively GLRD-version p.rt. pertaining pump data sheet

Open the catalog to page 1