- Products
- Catalogs
- News & Trends
- Exhibitions
RT-100
RT-100
- Continuous self-diagnosis with error indication.
- Two operational modes: Normal (receiver) and PLB/ELT (alarm triggered by specific code signals).
- Second frequency available for testing purposes.
- Adjustable squelch level and 16-step display for signal strength.
- Built-in speaker and audio output for external speakers.
- Relay contact for activating external devices during an alarm.
- Reception Frequencies: 121.500 MHz (distress) and 121.650 MHz (test).
- Operating Temperature: -20 °C to +60 °C.
- Ingress Protection: IP 65 (dust and splash-proof).
- Sensitivity: Less than 0.5 µV at antenna input.
- Audio Output: Maximum 8 Vss for speakers over 8 Ω.
- Relay Contact: Maximum 0.5 A and 10 W resistive load.
- Power Consumption: 80 mA in standby, up to 400 mA with alarm and external speaker.
- Operating Voltage: 12 to 24 V DC (±20%).
- Dimensions: 85 mm x 115 mm x 35 mm; Weight: 350 g.
Catalog excerpts
Emergency Receiver “Man overboard!” Every emergency is discovered. The RT-100 Emergency Receiver monitors the 121.5 MHz international emergency frequency and provides an acoustic alarm if a signal is received on this frequency. At the same time, a relay is activated that can be used to trigger external alarm devices. When the “selective squelch” function is enabled, an alarm is triggered only if the signal is received from an emergency transmitter (ELT, PLB or EPIRB). This function eliminates the possibility of false alarms from interference or from aircraft misusing this frequency for voice communica
Open the catalog to page 1
Features • Continuous self-diagnosis with error indication • Normal mode (receiver mode) and PLB/ELT mode (Alarms are triggered in this mode only by PLB/ELT code signals with a typical downsweep. An acoustic beep is repeated 25 times when an alarm is triggered.) • Second frequency for testing • Adjustable squelch level • 16-step display of field strength of incoming signal • Built-in speaker for alarm and acoustic signals • Audio out for external speaker • Relay contact to activate external devices in the event of an alarm Technical data Reception frequencies: Operating temperature: Ingress protection: Sensitivity: Audio...
Open the catalog to page 2
