PRESTIGE PORTHOLES
2Pages

Prestige portholes product information Our Prestige portholes have the same allure as our ship's windows and escape hatches. They complement each other and give an attractive finish to all openings in the ship's hull. The portholes are manufactured from polished and anodised seawater resistant aluminium. A grey tinted acrylic is used as glazing, thickness 8 mm. All our Prestige portholes are CE certified and comply with the NEN-EN-ISO 12216 standard. The Prestige portholes can be used in design category A-Ocean. In general portholes opening inwards are used in order to allow the rooms to be ventilated. However, a non-opening variety is also available and naturally this has the same design. We manufacture the Prestige portholes in two models: one rectangular with four rounded corners and the other bullet shaped with two rounded Special friction hinges ensure that the opening part can be left open at any The portholes are fixed invisibly from the inside using an aluminium frame fitted to the ship's wall. Fitting is done by tightening up bolts in pre-dhlled and threaded holes. No preparation to the ship's hull is necessary. The outside of the porthole is designed such that all water will run off the outside. No water will come in when the porthole is opened after rainfall. • Acrylic in green, bronze or clear colour. • Aluminium powder coated in a RAL • Detachable flyscreen. • Rain cover, to allow for ventilation during rainfall. Available separately, but to be used in combination with a flyscreen. I—\ i_iif—if—\ info@rhigo.com F: ++31 164-259411 4612 PG Bergen op Zoom

Prestige portholes technical specifications Hole-in-plate dimensions for portholes Description: A porthole with an aluminium opening part fitted with an acrylic window pane. Fixing: With a clamping frame on the inside or with screws on the outside. Materials: The outer frame,the inner frame and the opening part are manufactured from seawater resistant aluminium AIMgSi 0.5. All fixing materials used are made from stainless steel.The window is made from 8 mm thick grey acrylic. Surface treatment: polished and anodised or powder coated in a RAL colour. Special requirements: The portholes must...