Automatic Outboard Flushing System
2Pages

{{requestButtons}}

Catalog excerpts

Automatic Outboard Flushing System - 1

Automatic Outboard Flushing System U.S. Patent No. 9,517,495 Service Up To 4 Outboards Without The Hose Hassle Shown: Fourengine system with fitting kit Prevent engine corrosion and clear out invasive species The system works whether the vessel is in or out of the water, with the engine off, and in the vertical or tilted position. The water travels from the hose, through the system, and sent to each engine for a preset time– until the last motor is flushed. The system automates the flushing sequence so the user does not have to connect the hose to every flushing port. Built-In Solution To Flushing It can be installed at the OEM level or as a retrofit. Mounted on the bulkhead or transom locker, the system is permanently plumbed to each engine through the engine’s wiring loom. The system features the hose connection and start button on the unit itself. It will also offer a separate hose connection and a waterproof start button that can be installed remotely near the transom and/or console. Minimizing the reach is a big added convenience. Less cleaning time to put the boat away Boat can be in or out of the water Automatically flushes each engine, one at time until all have been flushed Service Mode enables manual control Push a button, step back, and watch it work. 3 Steps To Flushing Faster 1 Connect freshwater hose to the system. Press start button. Flushes the first motor completely before moving to the next, and shuts off once all motors are cycled. 2 Optional, remote start button installed on the console System is mounted on a bulkhead below deck. 1+2 Optional, remote deck connection for freshwater hose and start button. 1 Connect freshwater hose and press start on the system. Connects to every motor’s flushing port through the rigging.

Open the catalog to page 1
Automatic Outboard Flushing System - 2

^ Choose your system A basic system to flush all outboard motors. Fittings sold separately. [a Choose Fitting Kit Required: Inlet 3/4” straight and 90° elbow fitting, Outlet 3/8” and 1/2” hose barb in straight and 90° elbow fittings. Choose Remote Switch Optional: To mount a remote switch in an area easier to access than the system itself. Reverso Pumps LLC www.reversopumps.com | contact@reversopumps.com | Ph: (954)

Open the catalog to page 2

All Reverso Pumps LLC catalogs and brochures

  1. Fuel Primer

    2 Pages

Archived catalogs