Catalogs >
Revere Survival Products >
REFLECTIVE TAPE

REFLECTIVE TAPE
1Pages

Catalog excerpts

REVERE Püiifl SHEET "\~ MANUFACTURER OF SURVIVAL EQUIPMENT SINCE 1936 SURVIVAL WITH THE FITT^" Revere Part Product Details RETRO-REFLECTIVE TAPE USCG Approved • Reflects light at night so you can be more easily seen • Can be found faster by search lights • Reflectivity over a wide range of angles Adheres to a wide variety of materials: Rubber Film Vinyl Film/Vinyl Laminated Cloth Glass Reinforced Polyester Polyurethane Film 1. Separate approximately 1 "of liner paper from reflective material. 2. When properly aligned, press down the exposed adhesive area by starting from the inside and working 3. Slowly remove the rest of the liner, keeping material away from the surface until pressure is applied. Press down entire reflective area in this manner. 4. On all vinyl applications, use talcum powder around edges after material application to prevent tackiness. It is recommended, to achieve maximum adhesion, to allow up to 48 hours (above 60 °F) before handling, Wash by hand using warm water Self-Adhesive Backing Approx. Unit Case Quantity

Open the catalog to page 1