DS-4020W_V4
4Pages

Technical data-sheet - 30/09/2010 RESOLCOAT 4020 W Hardener 4024W Water based self-levelling epoxy system Simple « ready to use » kits. Very high resistance Mat surface aspect RESOLCOAT 4020 W is a water based self levelling, thick, highly resistant epoxy coating system based on a 100% dry extract epoxy resin. It´s unique formula enables the realization of perfectly levelled floors—with a simple no-nonsense application method. Perfect surfaces will be obtained with 3 mm (~5Kg/m²) to maximum 6 mm (~10Kg/m²) . Apart for hydrophobic or greasy surfaces, RESOLCOAT 4020 W is compatible with most subtracts such as concrete, cement, stone, terracotta, metal, composites...etc. Nevertheless, on porous subtracts, it is recommended to apply a primer coat of RESOLCOAT 1010—1014 in order to close the surface and block air bubbles coming up. Application may be done with a notched spatula or a flat ruler with calibrated spacers in order to achieve uniform thicknesses while spreading the compound. It is recommended to use bubble buster rollers in order to achieve perfect mat surfaces with a slightly anti skid surface. If necessary, it is possible to increase the scratch resistance with a modified Polycarbonate varnish RESOLTHAN TOP FINISH with mat, semi gloss or high gloss aspect. Resolcoat 4020W should not be used on surfaces exposed to intense direct UV exposure. RESOLCOAT 4020 W does not contain any solvents, making its application safe for the users and environmentally friendly. Page 1/4 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

Resin 4020 W Hardener 4024W Self levelling epoxy system MIXING RATIO BY WEIGHT Resin 4020 W Hardener 4024W 2,05 Kg 6 Kg Pigment Paste 0,95 Kg quartz sand SILMIX 300 25 Kg Diluant Water 0 to 2 kg The mixing ratio must be respected, with no default or excess. Mixing should be homogeneous before use. The resin, hardener and pigments must be mixed prior to the incorporation of the sand. For quantities over 60 kits, it is possible to order the resin pigmented to any RAL colours. APPLICATION It is recommended to use the system within temperatures between 18ºC and 25ºC in order to facilitate the...

Resin 4020 W Hardener 4024W Self levelling epoxy system APPLICATION Application : Right after mixing, pour onto the surface, level with a ruler or a notched spreader (8mm triangular notches) and help the air release with a self levelling floor bubble-buster roller: The minimum thickness required is 3 mm (~5Kg/m²) and maximum 6 mm (~10Kg/m²) PHYSICAL CHARACTERISTICS @ 23°C Visuel aspect 4020 W : 4024W : Colorless liquid Colorless to slightly yellow liquid 4020 W : 4024W : 1,1 1,1 Density HARDENING Pot life @ 25°C sur 100g : Complete hardening @ 25°C : 1h 24 h to 48h CHARACTERISTIQUES...

Resin 4020 W Hardener 4024W LABELLING 4020 W 4024W X C PACKAGING HEALTH & SAFETY 4020 W 2,05 kg in 3L metal can It is advised to follow basic rules such as avoiding skin contact, wear masks when producing dust. Please read our standard health and safety sheet for more information. 4024W 6 Kg in 27l plastic can Pigment In case of eye contamination, wash with water and seek 0.95 Kg in 1L metal can medical advice. Sable SILMIX 300 25 Kg bag TRANSPORT & STORAGE Shelf life is one year in sealed containers as provided. Keep containers sealed and away from heat and cold preferably between 10°C and...