Catalogs >
RESOLTECH >
DS-3300

DS-3300
4Pages

Catalog excerpts

RESOLTECH 3300 Data sheet — 06/10/2011 Hardener 3305 High Chemical resistance epoxy structural adhesive for above and underwater applications Applicable in high humidity conditions above & underwater High Chemical resistance 100:50 mixing ratio by weight or volume Available in standard 310 ml cartridges RESOLTECH 3300 is a high chemical resistance structural epoxy adhesive that can be applied onto dry or damp surfaces but also underwater. RESOLTECH 3300 is used to seal, bond or repair a large selection of materials, including fiberglass, aluminium, steel, concrete and ABS plastics. It is available in 5+2,5 kg kits or in standard 310 ml cartridges. The white resin and black hardener make it easy to visually check the homogeneity of the mixture. It is possible to fill the 3300 with sand, chopped glass fibre..etc to use it as underwater repair mortar. Its main characteristics are : Excellent chemical resistance. Adheres to damp subtracts and cures above or underwater Excellent adhesion concrete, ceramic, brick, steel, GRP, cast iron and most ABS plastics. Polymerization with no contraction Its main applications range are : Underwater repairs Crack repairs in concrete floors Pipes and water tanks repair Structural bonding Structural sealing Fuel tanks bonding and sealing Bolts anchoring Page 1/4 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

Open the catalog to page 1

Resin 3300 Hardener 3305 Underwater curing epoxy adhesive MIXING RATIO The mixing ratio must be accurately followed. It is not possible to change the ratio, it would result in lower mechanical properties. The mixture should be mechanically stirred during no less than 5 minutes to ensure full homogeneity. Keeping the mixture in flat open containers reduces the risks of exothermic reaction. by weight or volume Resin 3300 Hardener 3305 100 50 PHYSICAL PROPERTIES @ 25°C RESIN 3300 . Type . Aspect . Brookfield viscosity . Density Epoxy resin with additives Off white paste (Other colors available...

Open the catalog to page 2

Resin 3300 Hardener 3305 Underwater curing epoxy adhesive APPLICATION The standard procedure of working with epoxy systems applies to the RESOLTECH 3300 / 3305. Mixing the resin and hardener should be done above 5 °C. It is recommended to proceed to a small test before industrial size application. It is recommended to deglaze, clean and degrease the support prior to application. The system, in order to polymerize underwater is very reactive. Do not leave mixed resin+hardener large amounts in the mixing container (exothermic reaction will create a dense foam) and release heat. In order to...

Open the catalog to page 3

Resin 3300 Hardener 3305 LABELLING 3300 3305 X N C Harmful to environment PACKAGING HEALTH & SAFETY Kits : 1kg+0,5 kg pail 5 kg + 2,5 kg pail Cartridges: Two components (total product =250 ml) in standard caulking mono-body 310 ml cartridge. It is advised to follow basic rules such as avoiding skin contact, wear masks when producing dust. Please read our standard health and safety sheet for more information. In case of eye contamination, wash with water and seek medical advice. Transport & STORAGE Shelf life is one year in sealed containers as provided. Keep containers sealed and away from...

Open the catalog to page 4