TECHNICAL DATA SHEET RESOLCOAT 2010FC EPOXY SELF-LEVELLING DECK COATING SELF EXTINGUISHING SELF LEVELING CORROSION RESISTANCE HIGH ADHESION TO METALS REPLACES CEMENT BASED PRODUCTS. COMPLIES WITH: MSC.61 (67) IMO A.653 (16) SOLAS 2000 (II-2/3.8, II-2/34 & II/49. MIXING MIXING RATIO RESIN 2010FC HARDENER 2015 BY VOLUME N/A N/A BY WEIGHT 100 21 Hardener(s) available: 2015. WARNING: The mixing ratio must be accurately followed. It is not possible to change the ratio, it would result in lower mechanical properties. The mixture should be thoroughly stirred to ensure full homogeneity. It is important to note that epoxy systems tend to heat up much faster in a pot than as a thin film. It is therefore necessary to only mix the necessary amount usable within the given pot life. Keeping the mixture in flat open containers reduces the risks of exothermic reaction. APPLICATION • • • • • • • The standard procedure of working with epoxy systems applies to the RESOLTECH 2010FC. The resin part (2010FC) should always be stirred thoroughly before use. Temperature of application: Around 20oC will improve the handling of the system. Low temperatures will increase viscosity and curing time. The metal surface should be clean, degreased and dustfree. A light abrasion will improve the adhesion of the system. For aluminium decks, a chemical treatment or sandblasting is required. Avoid curing the system at high temperatures as it may generate tension problems. For more information, please refer to the applications technical bulletins (TechNotes), available on request. Film thickness: Up to 10mm. CURING Application conditions: 18 to 25oC, 70% humidity maximum. Do not apply in temperatures lower than 10oC. Pot-life for 100g Walking over Full use 4 Hours. 24 hours at 23oC 72 Hours

PHYSICAL PROPERTIES Resin aspect Hardener aspect Mixture aspect Resin viscosity Hardener viscosity Mixture viscosity Resin density Hardener density Density of mixture CURED PROPERTIES Shore D hardness Flexural strength Flexural modulus Max TG Off white liquid Yellow liquid Off white liquid 5000 mPas 15 to 150 mPas 1000 to 1200 mPas 1.3 0.9 to 1 1.2 70 100 MPa 3,000 MPa 65°C 7 days @ 25oC PACKING, TRANSPORT & STORAGE Resoltech 2010FC is available as follow: 1kg + 0.21kg, 4kg + 0.84 kg, 23kg + 4.83kg packs. Shelf life is one year in sealed containers as provided. Keep containers sealed and away...