Catalogs >
RESOLTECH >
Aluminum 250 TV

Aluminum 250 TV
3Pages

Catalog excerpts

RESOLTECH ALUMINIUMMINUM FINE ALUMINIUMMINUM POWDER/FILLER Ideal to create a mechanical cling between gelcoat and following reinforcement layers or castings. Increasing of filler content in all RESOLTECH epoxy Gelcoats & ALUMINIUMminium casting resins The ALUMINIUM 250TV is an ALUMINIUMminium powder with average particle size of 60 µm. . The ALUMINIUM 250TV maybe used as filler for the 2060 ALUMINIUM 25 or the 1450T ALUMINIUM in order to increase the filler content these casting resins and transform them into thick pastes & improve the thermal conductivity of these casting resins. The ALUMINIUM250TV may also be used to improve adhesion of laminates onto epoxy gelcoats, by providing a mechanical bond rather than chemical bonding. See pictures of the application section on page 2. RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES

Open the catalog to page 1

APPLICATION Powder spread generously the ALUMINIUM 250 TV powder all over the freshly applied gelcoat in order to completely cover it. Once the gelcoat hardened, the excess of ALUMINIUM 250 TV must be removed with a brush or a vacuum cleaner, leaving on the back of the gelcoat a fine layer of aluminium with the texture of a 400 grit sanding paper. The filler embedded on the gelcoat will ensure an excellent mechanical adhesion with the reinforcement to be laminated or infused on it. Tip: The right moment to spread the ALUMINIUM 250TV on the gelcoat depends on the reactivity of the gelcoat...

Open the catalog to page 2

Resoltech ALUMINIUM 250TV COVERAGE When applying the Aluminum powder onto the gelcoat on a relatively flat mould (largest posible consumption), an average of 350 gr/m2 should be planned. Once the gelcoat has hardened and the excess of Aluminium 250 TV removed, approximately 180gr/m2 will stay bonded onto the gelcoat. LABELLING / TRANSPORT Non dangerous according to UN,IMO, ADR/RID and IATA/OACI regulations. HEALTH & SAFETY It is advised to follow basic rules such as , wear masks when producing dust. Please read our standard health and safety sheet for more information. In case of eye...

Open the catalog to page 3