*mynauticexpo

3100

Product catalog summary

Product Overview:
RESOLTECH 3100 / 3102 is a high-performance, rubber-toughened epoxy adhesive designed for structural bonding with high mechanical and peel resistance. It cures at room temperature and is suitable for bonding composite materials, steel, and aluminum, withstanding temperatures from -50°C to +80°C, and peaking at 120°C. The adhesive is solvent-free and does not contract upon curing.

Specifications:
- Mixing Ratio: 100 parts resin (3100) to 20 parts hardener (3102) by weight.
- Density: Mixed density at 23°C is 1.10.
- Viscosity: Mixed viscosity at 23°C is 1,600 mPa.s.
- Pot Life: 1 hour 20 minutes at 23°C.
- Exothermic Peak Temperature: 172°C.

Application Procedures:
- Mix resin and hardener above 5°C for at least 5 minutes.
- Ensure surfaces are clean, degreased, and prepared (sanded or etched as necessary).
- Maintain parts in contact during curing without excessive clamping.
- Clean tools before polymerization with acetone or MEK.

Mechanical Properties:
- Service Temperature: -50°C to +80°C, with a peak at 120°C.
- Glass Transition Temperature (TG): 46°C after 14 days at 23°C, 66°C after 8 hours at 60°C.
- Hardness: 80 Shore D after 14 days at 23°C.
- Flexural Modulus: 2.86 GPa after 14 days at 23°C.
- Maximum Flexural Strength: 83.6 MPa after 14 days at 23°C.

Packaging and Storage:
- Available in kits of (1+0.2) kg, (5+1) kg, (25+5) kg, and (200+20) kg.
- Store between 10°C and 30°C in a well-ventilated area.

Health and Safety:
- Avoid skin contact; use protective gloves and clothing.
- Use eye protection and ensure adequate ventilation.
- In case of eye contact, rinse with water for 15 minutes and seek medical attention.
- Use respiratory protection with ABEKP coded filters.

Disclaimer:
The data provided is based on tests and believed to be accurate. Liability is limited to the product value.

Catalog excerpts

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 resoltech * ADVANCED TECHNOLOGY RESINS RESOLTECH 3100 Hardener 3102 ■ Structural toughened epoxy high peel resistance adhesive for demanding applications ■ Room temperature curing ■ Excellent impact damage resistance RESOLTECH 3100 / 3102 epoxy adhesive is a rubber toughened, high performance adhesive that will enable bonding with very high mechanical resistance and high peel-resistance. Its room temperature cure makes this epoxy adhesive an easy product to work with. It will enables structural bondings of all types of composite materials, steel, aluminium, and will resist in a large range of operating temperatures from -50°C to +80°C, with a maximum service temperature of 120°C and very good resistance to thermal shocks. It is a solvent less adhesive with no contraction upon curing. RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

Open the catalog to page 1

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

Open the catalog to page 2

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 The standard procedure of working with epoxy systems applies to the RESOLTECH 3100 / 3102 : ■ Mixing the resin and hardener should be done above 5 °C. ■ It is recommended to proceed to a small test before industrial size application. ■ It is recommended to deglaze, clean and degrease the support prior to application. RESOLTECH 3100 / 3102 is a room temperature cure adhesive formulated for a large range of bonding applications and will provide superior adherence onto composites, steel & aluminium. It is suitable for core bonding...

Open the catalog to page 3

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 Flexural properties according to ISO 178 RESOLTECH RESOLVING YOUR ENGINERING CHALLENGES www.resoltech.com

Open the catalog to page 4

Technical Datasheet - v3 - 26.08.2016 Previous version - 28.02.2014 PACKAGING 3100 / 3102 kits available : ■ (1+0.2) kg Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date stated on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the...

Open the catalog to page 5

3100

3100

Catalog excerpts

All RESOLTECH catalogs and brochures

Archived catalogs