PT-25 HEAVY DUTY PAN & TILT UNIT Dual axis heavy duty pan & tilt to remotely position camera systems, acoustic equipment, and other instrumentation. The unparalleled reliability of the PT-25 is due in part to its rugged construction. Housings and machined components are made of corrosion resistant, hard-anodized aluminum. All external hardware is made of stainless steel, with oceanographic and nuclear applications in mind. 40 N-m (30 lb-ft) ofof output torque 40 N-m (30 lb-ft) output torque on each axishandles heavy loads on each axis handles heavy loads Available in either ACAC DC power Available in either or or DC power configurations configurations Corrosion-resistanthousing is ideal for for Corrosion-resistant housing is ideal use in hazardous environments use in hazardous environments The PT-25 provides 40 N-m (30 lb-ft) of output torque on each axis. Heavy-duty ball bearings supporting the output shaft allow it to accommodate heavier payloads up to 100 pounds. The drive train for each axis of the pan & tilt uses either a reversible synchronous motor or a brushless stepper motor coupled to low backlash harmonic gearing. The rugged design of the gear train allows stalling of either output shaft without damage to the gears or the motor. With the choice of different AC or DC power configurations the PT-25 can be used in a wide array of varying environments and applications. The PT-25 heavy duty pan & tilt complements all ROS underwater lights and camera systems and was designed to be an integral part of turnkey, remotely operated, video inspection systems. All ROS positioning units are available in either dual or single axis configurations. ROS has been manufacturing an array of harsh environment cameras, lights, positioners, and specialized systems designed for oceanographic, nuclear, industrial, and military applications for over 30 years . 5618 Copley Drive : : San Diego, CA 92111 USA : : Tel (858) 565-8500 : : Fax (858) 565-8808 : : East Coast Office (804) 754-3936 www.rosys.com : : [email protected]

PT-25 - Heavy Duty Pan and Tilt Unit PERFORMANCE Power: Torque: Rotation Speed (80:1 gears): 60 Hz: 50 Hz: Harmonic gear backlash (80:1 gears): Scan Range (both axes): Scan Range with optional yoke bracket: Static braking option (24 VDC model only): MECHANICAL Housing Material: Height: Width: Air-filled: Oil-filled with bellofram: Length without connector: Main Body Diameter: Output Shaft Diameter: Weight in Air: Air-filled: Oil-filled: Weight in Water: Air-filled: Oil-filled: Standard Connectors: Housing Mounting: Equipment Mounting: Mounts: External Mechanical Limits: Compensator (oil-filled...