video corpo

UTC+URC

UTC+URC

UTC+URC

Product catalog summary
Technical Specifications:
The document outlines the technical specifications for a radio remote control system, including both transmitter and receiver units. The system operates on two frequency bands: 434 MHz and 870 MHz, with a maximum of 20 simultaneous on/off commands. The command response time is 45 ms, and the system has a control range of approximately 100 meters. The working temperature range is from -20°C to +70°C.

Transmitter Unit:
The transmitter unit supports up to 20 simultaneous commands and features LED indicators for status monitoring. It uses GFSK modulation with a radio frequency output power ranging from 1 to 10 mW. The unit is powered by 12-24 Vdc or 24-115 Vac and is housed in a Modulbox casing with IP20 protection.

Receiver Unit:
The receiver unit features a single-chip radio frequency receiver and external antenna. It supports relay contacts with a power of 4A (DC1/AC1) at 115V. The unit is also powered by 12-24 Vdc or 24-115 Vac and housed in a Modulbox casing with IP20 protection.

Safety and Compliance:
The system complies with various directives and standards, including the Radio Equipment Directive (RED) 2014/53/EU, Machinery Directive 2006/42/CE, and several EN and ETSI standards for safety, health, and EMC.

Additional Features:
A self-powered display instrument, the Monitor Tester, can be connected to the receiver to acquire operating data such as working frequency, signal level, and relay diagnostics.

Manufacturer Information:
REMdevice Srl, located in Nove, Italy, is the manufacturer of the system. Contact information and website details are provided for further inquiries.
See more

Catalog excerpts

UTC+URC-1

REMdevice Next Generation Control Technical sheet Command Transfer: UTC +URC The UTC (Commands Transmission Unit) and the URC (Command Reception Unit) modules can be used for the radio transfer of the ON-OFF commands and are capable of up to 20 simultaneous and individual commands. LED indicators give an instant reading of the functioning of the radio remote control. There are two frequency bands available: 434 MHz and 870 MHz. Technical characteristics Transmitter unit Frequency: 433 MHz / 59 channels 870 MHz / 11 channels Commands: on/off Hamming Code > 4 Max n° of simultaneous on/off commands: 20 + start + stop Command response time: 45 ms Start/Active emergency response time: 45 ms Passive emergency response time: 1 s Performance Level of safety function according to Stop protection: Category 3 PL d Protection against unintended movements from the standstill position: Category 2 PL c Range of control: approx. 100 mt (-330ft) Working and storage temperature: -20°C to +70°C (-4°F to +158°F) • Modulation: GFSK • Radio frequency output power: from 1 to 10 mW • Oscillator: digital synthesizing PLL • Antenna: external • Modulbox casing for mounting on DIN EN 50022 Receiver unit • Radio frequency Receiver: Single Chip • Antenna: external • Power of command relay contacts: 4A (DC1/AC1)* / 115V • Power of relay contacts: 4A (DC1/AC1)* / 115V • connecting a diode in parallel with the load, the same current is allowed for category Dc13 (inductive load). To comply with category AC15 is recommended to place in parallel connection with the load an appropriate overvoltage damping RC circuit. (Ref. IEC/EN60947) • Modulbox casing for mounting on DIN EN 50022

 Open the catalog to page 1
UTC+URC-2

Next Generation Control Monitor tester Self-powered display instrument to connect to the receiver, capable of acquiring the operating data of the radio control. • Working frequency and operating channel • Signal and interference level • Number of starts and working hours • Number of Up and Down commands • Relay operating diagnostics • Active controls Reference rules Reference standards Reference directives Radio Equipment Directive (RED) 2014/53/EU Machinery Directive 2006/42/CE (as applicable) Russia EAC-GOST Certificate Radio ETSI EN 300 220-1 V3.1.1 Final Draft ETSI EN 300 220-2 V3.1.1 Final...

 Open the catalog to page 2

All Rem device catalogs and brochures

  1. DCS10

    2  Pages

  2. Genesis

    2  Pages

  3. Pail

    2  Pages

  4. T Series

    2  Pages

  5. Brick

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.