MOVE
2Pages

MOVE Series Technical sheet Innovation and revolution REMdevice uses the multifunction MOVE platform. The maximum configurability according to customer’s specifications with BRICK, PAIL and GENESIS transmitters. Technical features • Control Commands: on/off - CANbus - PWM - voltage/current – RS 422/485 • Parameters common to both transmission and receiver units: Full-Duplex multi-band operating frequency, 72 channels - ISM band • Hamming code distance > 4 • Response time to commands: from 20 ms to 80 ms according to configuration • Active emergency stop command response time: 20 ms • Command passive emergency response time: 1 s • The stop command is rated PL-E cat. 4 (ISO 13849-1) and SIL 3 (EN62061) • The joysticks (UMFS) are rated PL-D cat. 3 and SIL 2 • Range: about 100 m • Operating and storage temperature: -20°C / +70°C • Operating frequency: Dual-band 433/869 MHz with continuous sequential scanning. 72 channels 915 MHz version for the American and Canadian markets 418 MHz version for the Chinese market • Connectivity CANopen (with over 50 base objects) for automotive applications • Connectivity RS422 and RS485 for PLC and automation • All types of outputs: digital (on/off) - voltage (radiometric, danfoss, etc.) - PWM power current - current 4-20 mA • Type of inputs: digital (on/off) analogue in tension (0-10V) analogue in current (4-20mA) Transmitter units • • • • • • • • • • Modulation: GFSK Manchester encoding Radiofrequency emitting power: 1÷10 mW Oscillator: PLL digital synthesizer Antenna: dedicated multi-band Power Supply: 3.6 Vdc Current demand: max. 50 mA Accumulators: built in 3X1.2V = up to 40 hours’ autonomy Battery low warning time: 30 minutes Casing protection grade: IP 65 PA6 FG Nylon PA6 Dimensions (LxHxD) GENESIS 310X163X193 mm - PAIL 200x130x135 mm BRICK 97x44x210 mm - T3, T5, T7 83X42X174 mm • Weight (variable according to configuration): GENESIS 1580 g - PAIL 930 g BRICK 470 g - T3, T5, T7 350 g

^Elildevice Next Generation Control Receiver units ■ Radiofrequency receiver: Single Chip ■ Antenna: dedicated multi-band • Safety relay contact capacity: 8A (DC1/AC1)* / 115V ■ Command relay contact capacity: 4A (DC1/AC1) / 115V ■ Stop relay contact capacity: 4A (DC1/AC1) / 115V ■ RUBYBOX move No. of on/off contacts: 16 + START + 2 STOP + CLAX + LAMP No. of digital inputs: 2 No. of optional modules (4 for each RUBYBOX): 12 + 1 ■ DIN move No. of on/off contacts: 22 + START + 2 STOP + CLAX No. of digital inputs: 2 No. of optional modules (2 for each Modulbox): 12 + 1 ■ ECOBOX move No. of...