REMdevice Next Generation Control Technical Sheet A step forward in all fields Genesis fears no challenge: its recognized resistance to work exploits the tested but innovative (patented) wireless induction recharging system. Genesis is the fully customizable, robust and ergonomic console. Technical characteristics • Dual Band frequency: 433 MHz / 60 channels • Frequency: 418MHz / 11 channels China • Commands: on/off, CANbus, PWM, voltage/current, RS 422/485 • Connectivity CANopen (with over 50 base objects) for automotive applications • Al types of outputs: digital (on/off) - voltage (radiometric, danfoss, etc.) - PWM power current - current 4-20 mA • Type of inputs: digital (on/off) analogue in tension (0-10V) analogue in current (4-20mA) • Hamming code distance > 4 • Response time to commands: from 20 ms to 80 ms according to configuration • Active emergency stop command response time: 20 ms • Command passive emergency response time: 1 s • The stop command is rated PL-E cat. 4 (ISO 13849-1) and SIL 3 (EN62061) • The joysticks (UMFS) are rated PL-D cat. 3 and SIL 2 • Operating and storage temperature: -20°C / +70°C Transmitter unit • Modulation: GFSK Manchester • Radiofrequency emitting power: 1+10 mW • Oscillator: PLL digital synthesizer • Accumulators: built in 3X1.2V = up to 40 hours' autonomy • Battery low warning time: 30 minutes • Casing protection grade: IP 65 • Weight (variable according to configuration): 1580 g • Control cable (radio exclusion) • Version with external LI-ION rechargeable and replaceable battery in continuous operation 24/7 without interruption of commands also during the replacement of the external battery

GENESIS - Technical Sheet REMdevice Next Generation Control Receiver units • Radiofrequency receiver: Single Chip • Antenna: Multiband internal UHF. Antenna external optional • Safety relay contact capacity: 8A (DC1/AC1)* / 115V • Command relay contact capacity: 4A (DC1/AC1) / 115V • Stop relay contact capacity: 4A (DC1/AC1) / 115V • RUBYBOX move No. of on/o ffcontacts: 16 + START + 2 STOP + CLAX + LAMP No. of digital inputs: 2 No. of optional modules (4 for each RUBYBOX): 12 + 1 No. of on/o ffcontacts: 22 + START + 2 STOP + CLAX No. of digital inputs: 2 No. of optional modules (2 for each Modulbox):...