Next Generation Control Bidirectional and up to 10 simultaneous commands DCS10 module is an industrial remote control that is able to transfer up to 10 simultaneous on/off commands or electrical contact between industrial equipment via radio signal. The DCS10 remote control uses only one radio channel and it is available in UHF version (Dual band 433 and 870 MHz) and 418 MHz (China). Technical features • Dual Band frequency: 433 Mhz / 16 channels and 870 Mhz / 12 channels • Frequency: 418 Mhz / 12 channels • Hamming code distance > 4 • Maximum number of on/off simultaneous commands: 10 + start + stop • Command response time: 50-100 ms • Active emergency stop command response time: 50 ms • Command passive emergency response time: 1 s • STOP function: cat 3 PL d • Range: 100 mt • Operating and storage temperature: -20°C/+70°C • Modulation: FM Manchester coding • Emitting power: 418 Mhz 20 mW 433 Mhz 10 mW 870 Mhz 5 mW • Antenna: external • Power supply: 12-24 Vdc / 24-115 Vac • Current demand: 12-24 Vdc 0,4 A / 24-115 Vac 0,2 A • Casing protection grade: IP20 • Material: ABS • Dimensions: 158 x 90 x 75 (LxHxD) • Weight: 425 gr • Command relay contact capacity: 4A (DC1/AC1) 115Vac • Stop

REMdevice Next Generation Control Monitor tester Self-powered display instrument to connect to one of two Rtx module capable of acquiring the operating data of the Radio control • Working frequency and operating channel • Signal and interference level • Number of starts and working hours • Number of Up and Down commands • Relay operating diagnostics • Active controls Reference rules Reference standardsReference directives Safety EN 62368-1:2014 + A11:2017 EN 62745:2017 (cabeless control systems of machinery) Cina Radio Transmission Approval Russia EAC-GOST Certificate Radio Equipment Directive...