*mynauticexpo

Brick

Product catalog summary

Overview
This document provides a technical overview of the BRICK transmitter unit by REMdevice, highlighting its robust design and innovative features such as a patented induction recharging system that is fully isolated from dust and humidity. It is designed for demanding applications requiring continuous operation without downtime.

Technical Specifications

Commands: On/off, potentiometric control, BCD Code, RS 422/485
Response Time: Command and active emergency stop response time is 45 ms; passive emergency response time is 1 second
Safety Ratings: Stop command rated PL d cat. 3 and SIL 2
Range: Approximately 100 meters
Temperature Range: Operating and storage from -20°C to +70°C
Modulation: GFSK Manchester
Power Supply: 3.6 Vdc with a maximum current demand of 45 mA
Battery: Built-in 3x1.2V 1800 mA accumulators with up to 40 hours of autonomy at 20°C
Protection: Waterproof casing with IP65 protection grade
Weight and Dimensions: 470 g (varies by configuration), 97x44x210 mm

Options

LCD 1.3” display
Lever switch
Proportional control

Frequency Bands

Dual Band frequency: 433 MHz / 60 channels, 418 MHz / 11 channels (China), and 870 MHz / 12 channels

Receiver Units

Radiofrequency receiver: Single Chip with multiband internal UHF antenna
Command relay contact capacity: 4A (DC1/AC1) / 115V
Stop relay contact capacity: 4A (DC1/AC1) / 115V
Supply: 12-24 Vdc ±25% / 24-115 Vac ±10%
Protection: Waterproof casing with IP65 protection grade

Monitor Tester
A self-powered display instrument that connects to the receiver to acquire operating data, including working frequency, signal level, and relay diagnostics.

Induction Charging System
The BRICK transmitters feature a patented wireless induction charging system.

Compliance and Standards
The device complies with various directives and standards, including the Radio Equipment Directive (RED) 2014/53/EU, Machinery Directive 2006/42/CE, and several EN and ETSI standards for safety, health, EMC, and radio.

Certifications
Includes China Radio Transmission Approval Certificate and Russia EAC-GOST Certificate.

Catalog excerpts

REMdevice BRICK Technical sheet Leader in sturdiness and long-life It is the ﬁrst keyboard with patented induction recharging system, fully isolated from dust and humidity A conﬁgurable console for the most demanding applications, ideal to work continuously, without worrying about downtime. Technical features Transmitter unit • Dual Band frequency: 433 MHz / 60 channels and 870 MHz / 12 channels • Frequency: 418 MHz / 11 channels China • Commands: on/oﬀ, potentiometric control, BCD Code, RS 422/485 • Hamming code distance > 4 • Command response time: 45 ms • Active emergency stop command response time: 45 ms • Command passive emergency response time: 1 s • The stop command is rated PL d cat. 3 and SIL 2 • Range: about 100 m • Operating and storage temperature: -20°C / +70°C Modulation: GFSK Manchester Radiofrequency emitting power: from 1 to 10 mW Oscillator: PLL digital synthesizer Antenna: built in Power Supply: 3.6 Vdc Current demand: max. 45 mA Accumulators: built in 3X1.2V 1800 mA Up to 40 hours’ autonomy (20°C) Battery low warning time: 30 minutes Waterproof Casing for Outdoor use:Protection Grade IP65 Material: Nylon PA6 FG • Weight: 470 g (varies depending on conﬁguration)

Open the catalog to page 1

BRICK - Technical sheet REMdeviceNext Generation ControlReceiver units • Radiofrequency receiver: Single Chip • Antenna: Multiband internal UHF. Antenna external optional • Command relay contact capacity: 4A (DC1/AC1) / 115V • Stop relay contact capacity: 4A (DC1/AC1) / 115V • No. of on/off contacts: < 22 + START + STOP + CLAX + LAMP • No. of proportional contacts: 1 BCD (optional module) Optional only CL RUBYBOX: AC 230V ±10% 50-60 Hz • Waterproof Casing for Outdoor use: Nylon PA6 FG, Protection Grade IP65 • Dimensions RXDIN-CL and CL RUBYBOX: 166X279X91 mm (LxHxD) • Dimensions RXDIN: 158x75x90...

Open the catalog to page 2

Brick

Brick

Catalog excerpts

All Rem device catalogs and brochures