- Catalogs
- Recom Industriale
- Explorer 4 control unit
Explorer 4 control unit
Explorer 4 control unit
- Capacity: Supports up to 4 analogue channels per unit, expandable to 16 channels on a 19" rack.
- Inputs: Two- or three-pole, mA, with a maximum of 36W total.
- Size and Weight: Depth 105 mm (21U) x height 132.5 mm (3HE), weighing 1700 grams.
- User Interface: Features a 2x16 digit backlit LCD display, red LEDs for gas thresholds, a yellow LED for fault indication, a green LED for live status, and a 90dB acoustic alarm.
- Power Supply: Operates on 110-220 Vac or 18-28 Vdc, with power absorption between 5 - 25 W.
- Environmental Conditions: Operates in temperatures from -20°C to +55°C and 0% to 95% relative humidity (non-condensing).
- I/O Modules: Includes 4 analogue inputs in 4-20 mA, a general alarm relay, a fault signalling relay, and 3 relays per channel.
- Approvals: Complies with EMC/RFI (EN 50270:2015), Maritime RINA ELE 272113CS, MED Mod B & E 272113CS, EN 60076-29-1:2007, and EN 50104:2010 standards.
- Modular design allows easy rack assembly and expansion up to 16 sensors.
- Equipped with a 16-character alphanumeric display and multifunction buttons for programming.
- Each channel is independent, with 4 LEDs and 3 output relays for alarm thresholds.
- Includes a general alarm relay and a fault relay common to all channels.
- MED approved for naval applications.
Catalog excerpts
Explorer 4 Multi-channel rack-mounted control unit 4 channels 4-20 mA Backlit display Easy rack assembly Modular up to 4 units for 16 sensors The control unit Explorer 4 is a multi-channel analysis system, which enables collecting in a single rack four control units to detect flammable and toxic gases, oxygen or other parameters. The system Explorer 4 is designed for continuous gas monitoring and alarm control. It is housed in a rack for easy panel installation, containing the power supply, display, control and alarm cards. If more than 4 analysis points are required, racks are available for 2 units (8 points), 3 units (12 points) with 19" standard or 4 units (16 points) always with 19" standard but with separate rack for power supply cards. Explorer 4 has a 16-character alphanumeric display on the front, 3 multifunction buttons for programming and a series of LEDs for visual signalling of voltage presence, exceeding gas threshold and fault (general alarm). The display shows the gas concentration present and the relative unit of measurement. Each channel, independent, is equipped with 4 LEDs and 3 output relays one for each alarm threshold. A general alarm relay and a fault relay are available in common to all 4 channels. In the system Explorer 4 all operations are carried out by using 3 programming keys. The Explorer 4 is MED approved for naval applications. Order information Explorer 4 Power supply Rack for one unit Front view RECOM INDUSTRIALE s.r.l. Via Pietro Chiesa, 25 r. - 16149 Genoa - Italy Tel. (+39) 010.469.56.61 r.a.– Fax (+39) 010.642.42.05 Email: [email protected] http: //www.recomindustriale.com S. C. €.110.000,00 fully paid capital C.C.I.A.A. 38999 GE RE.A. 365226 GE VAT and fiscal code 0361889010
Open the catalog to page 1
Explorer 4 General technical specifications / S. C. €.110.000,00 fully paid capital C.C.I.A.A. 38999 GE RE.A. 365226 GE VAT and fiscal code 03618890101 recom industriale s.r.I. Via Pietro Chiesa, 25 r. - 16149 Genoa - Italy Tel. (+39) 010.469.56.61 r.a.- Fax (+39) 010.642.42.05 Email: [email protected] http: //www.recomindustriale.
Open the catalog to page 2All Recom Industriale catalogs and brochures
Infrared sensors2 Pages
Combustible gases sensors2 Pages
Oxygen sensors2 Pages
Gas Screen 40 control unit4 Pages
Explorer Gas Detector1 Page
Explorer 4 Multipoint3 Pages
