NAUTIMAR

NAUTIMAR

Product catalog summary
Product Specifications
The fabric is composed of PVC coated polyester HT 280 dtex and is designed as a translucent waterproof material with a coated, lacquered matte finish resembling leather on one side. It is available in 8 colors and intended for outdoor use.
Technical Features
  • Weight: 330 g/m² (UNE-EN ISO 2286-2)
  • Thickness: 0.30 mm (UNE-EN ISO 2286-3)
  • Width: 220 cm
  • Standard Roll Length: 60 m
  • Tensile Strength (warp/weft): 140/130 daN/5 cm (UNE-EN ISO 13934-1)
  • Tear Strength (warp/weft): 11/11 daN (UNE-EN ISO 4674-1)
  • Temperature Resistance: -30 ºC to +70 ºC
  • Chemical Resistance: No change with window cleaning fluid, ammonia, bleach, and grease removing detergent; alcohol causes loss of shine and elasticity (UNE-EN ISO 2812-1)
  • Antimicrobial Activity: Formulated to prevent bacteria and fungi adhesion
Quality and Safety Standards
  • Quality Management System: ISO 9001 certified
  • Safety, Health, and Environment: Compliance with relevant standards
Important Notices
The technical values provided are average values with a tolerance of +/- 5%. S.A. RECASENS reserves the right to modify the data at any time, and it is the customer's responsibility to ensure they are using the latest information. The company declines responsibility for improper use or installation not in accordance with current regulations.
See more

Catalog excerpts

NAUTIMAR-1

TECHNICAL DATA SHEET FABRIC CHARACTERISTICS Composition PVC coated polyester HT 280 dtex Type of fabric Translucent waterproof finished Finish one side Coated, lacquered mate finish simile leather, on Colour range 8 colours Use Outdoor Width 220 cm / 86” Standard Roll Length 60 m / 65 yards Tensile strength (warp/weft) Tear strength (warp/weft) Resistance to cold and heat Resistance to chemical agents diluted in water Window cleaning fluid - No change Ammonia - No change Alcohol - Loss of shine and elasticity Bleach - No change Grease removing detergent - No change Antimicrobial activity Formulated with products helping that bacteria and fungi do not adhere to the fabric QUALITY MANAGEMENT SYSTEM ISO 9001 The indicated technical values are average values allowing a tolerance of +/- 5%. Since our products are constantly adjusted to the market needs / technical advances and therefore in constant evolution, S.A. RECASENS reserves the right to modify this data at any time, and it is customer’s responsibility to verify that data that being consulted or used corresponds to the latest upgrade. The client is responsible for the correct use of the fabric in regard to the applications for which it is designed and recommended. S.A. RECASENS declines any responsibility in regard to the assembly and set in use on site of its products. S.A. RECASENS declines all responsibility for the installation of its products if not used properly and / or in accordance with current regulations in place. Copyright © 2022 S.A. RECASENS. All rights reserved.

 Open the catalog to page 1

All Recasens catalogs and brochures

  1. RECWATER

    1  Page

  2. RECSYSTEM

    1  Page

  3. RECACRIL

    1  Page

  4. NAUTIPLUS

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.