Catalogs >
Anschuetz >
NautoPilot® 20X5 Series

NautoPilot® 20X5 Series
4Pages

Catalog excerpts

R Anschütz NautoPilot 20X5 Series ® Adaptive Heading Control System

Raytheon Anschütz NautoPilot' 20X5 is Raytheon Anschütz' professional autopilot series for all commercial ships of 100 m length and above. It is characterized by the most advanced steering algorithms that ensure accurate steering with fewest rudder actions to keep the ship on a preset heading. Thus the NP 20X5 series reduces wear and tear on the steering gear and reduces fuel consumption - an important factor these days. NP 20X5 pays for itself. The Autopilot Remote Control Panel can be installed at the Radar or ECDIS workstation where the navigation data is displayed. The tiller allows...

Open the catalog to page 2

In general an autopilot is a controller that keeps a ship on a preset heading. The quality of this process is determined by the hardware and the software algorithms that control it. Both, hardware and software algorithms determine the accuracy of the heading control system. The number of rudder actions and the rudder angle used to keep the ship on preset heading are reduced to a minimum with Raytheon Anschütz autopilots - thanks to the longest experience in the market. Adaptivity means an automatic adaptation of the autopilot to the current sea-state and weather. Frequent rudder actions...

Open the catalog to page 3

Raytheon Anschütz Technical Data Supply Voltage Power Consumption General Data Permissible ambient temperature Operator unit Signal Inputs Gyro compass / satellite compass - Course Bus or NMEA telegrams HEHDT, GPHDT Magnetic compass / fluxgate - NMEA telegrams HCHDT, IIHDM - With magnetic compass sonde 108-010 ECDIS (for track control) - According to IEC 62065, NMEA telegrams APB, XTE - Remote control with NMEA telegrams HSC, HTR, H RA - Nautopllot 2035: Track control with Raytheon Anschütz ECDIS only Signal Outputs Outputs to steering gear Status/alarm outputs - Heading monitor - System...

Open the catalog to page 4