Catalogs >
Anschuetz >
Anschütz NautoSteer Advanced Steering Control Series

Anschütz NautoSteer Advanced Steering Control Series
8Pages

Catalog excerpts

Anschütz NautoSteer Advanced Steering Control Series - 1

Raytheon Anschutz Advanced Steering Gear Control System

Anschütz NautoSteer Advanced Steering Control Series - 2

Steering gear control systems engineered by Raytheon Anschütz are known for their performance and reliability. NautoSteer AS is our advanced steering gear control system for customers that require reliability, safety and an outstanding functional range. BENEFITS AT A GLANCE • Cost-effective standard conﬁgurations • Flexible system conﬁgurations in order to fulﬁll sophisticated requirements • Best precision and safety thanks to proven Anschütz steering performance • Built-in reliability with CAN bus technology • Fail-safe principle with integrated steering failure and wire-break monitoring •...

Open the catalog to page 2

Anschütz NautoSteer Advanced Steering Control Series - 3

With NautoSteer AS Raytheon Anschutz can offer cost-effective, standardized systems but also customized and extended steering gear control systems. In any case, installation and wiring of NautoSteer AS are fairly simple and offer benefits to shipyards, integrators and shipowners: • State-of-the-art technology simplifies installation and wiring • Use of standard cables • Equipment is connected to CAN bus and power supply only • Less error-prone and less expensive than conventional systems • Computer-based commissioning (by a single person) • Software allows transparent configurations and...

Open the catalog to page 3

Anschütz NautoSteer Advanced Steering Control Series - 4

DUAL NFU DIRECT AND FOLLOW-UP CAN bus steering gear control system for a vessel with single rudder Bridge wing NFU Direct/ Main Selector Switch Bridge wing Override Signal Unit Signal Unit Alarm Status Interface AS Change Over Module Change Over Module Redundant CAN bus Single CAN bus Voltage Status In “NFU Direct” mode the NFU Tiller direct operates the valves/ pumps of the steering gear directly. The override signal unit is used for override of autopilot or other controls. In “Main” mode the FU Handwheel and therefore the CAN bus based steering gear control system is activated. Other...

Open the catalog to page 4

Anschütz NautoSteer Advanced Steering Control Series - 5

DUAL NFU DIRECT AND DUAL FU CAN bus steering gear control system for a vessel with dual rudders Bridge wing Synchron/ Independent Bridge wing NFU Direct/ Main NFU Tiller Selector Switch Direct portrudder Override Signal NFU Tiller Unit Direct stbd rudder Synchron/ Independent Change Over Module Change Over Module Change Over Module Alarm Status Interface AS Alarm Status Interface AS Change Over Module Redundant CAN bus Single CAN bus Voltage Status In “NFU Direct” mode two NFU Tiller direct operate the valves/ pumps of the steering gear directly. Both rudders are controlled independently...

Open the catalog to page 5

Anschütz NautoSteer Advanced Steering Control Series - 6

NAUTOSTEER AS SYSTEM COMPONENTS NautoSteer AS components have a modular mechanical design that allow for simple installation in consoles, frames and steering stands. Additionally NautoSteer AS is characterized by a modular functional design: Components can be combined to achieve functions according to customer requirements. Furthermore NautoSteer AS provides consistent haptic and operation, illumination, dimming and alerting. Steering Mode Operator Unit AS Override Signal Unit AS Alarm Signal Unit AS General Override Signal Unit AS Rudder Mode Operator Unit AS Take Over Operator Unit AS...

Open the catalog to page 6

Anschütz NautoSteer Advanced Steering Control Series - 7

The NautoSteer AS advanced steering gear control system seamlessly integrates highly precise and efficient autopilot systems. The autopilots are based on the proven Anschutz steering algorithms that have been well known by seafarers for outstanding steering performance and reliability for decades. The NautoPilot 5000 series provides heading control, and course control and is part of a track control system. It combines best steering performance with lowest rudder activity for less fuel consumption. In addition, with its touch screen functionality and a large graphical color display, the NP...

Open the catalog to page 7

Anschütz NautoSteer Advanced Steering Control Series - 8

STEERING STAND COMPILOT 20 RUDDER ANGLE INDICATOR SYSTEM ComPilot 20 is the turn-key solution for an individual steering gear control system, allowing integration of various devices into the steering stand as needed. The modular hardware design of NautoSteer AS permits functional and economical adaptation to any applicable specification. Raytheon Anschütz rudder angle indicator systems are characterized by a diversity of different indicators to fulfill individual customer needs and regulations: Instruments in different sizes, scales, type of installations and protection grades. In addition...

Open the catalog to page 8