Catalogs >
Anschuetz >
Anschütz Gyro Compass Standard 30 MF (maintenance-free)

Anschütz Gyro Compass Standard 30 MF (maintenance-free)
4Pages

Catalog excerpts

Anschütz Gyro Compass Standard 30 MF (maintenance-free) - 1

Standard 30 MF Maintenance-free Gyro Compass and Attitude Reference System

Anschütz Gyro Compass Standard 30 MF (maintenance-free) - 2

Standard 30 MF Maintenance-free gyro compass Standard 30 MF is the second generation of maintenance free gyro compasses from Raytheon Anschütz based on Hemispherical Resonator Gyro (HRG) technology. This sensor technology has been used in Horizon MF – the predecessor of Standard 30 MF – and has proven its reliability and accuracy. The new Standard 30 MF is even smaller than its predecessor and features an optimized integration into a Raytheon Anschütz heading management system. Developed with a strong focus on robustness, Standard 30 MF settles even at rough sea states and provides heading...

Open the catalog to page 2

Anschütz Gyro Compass Standard 30 MF (maintenance-free) - 3

MODULAR SYSTEM ARCHITECTURE A modular product range enables different system configurations – from a single compass up to a multi compass system consisting of magnetic compass, Standard 22, Standard 30 MF and redundancy in distribution. A wide range of accessories (including self-aligning repeaters, and converters for retrofits) is available. Standard 30 MF standalone The stand-alone system comes with 4 serial output interfaces and an analog +/-10V interface for rate-of-turn. Therefore, the Standard 30 MF can also be used as a rate-of-turn indicator (required for vessels above 50.000 GT)....

Open the catalog to page 3

Anschütz Gyro Compass Standard 30 MF (maintenance-free) - 4

TECHNICAL DATA Standard 30 MF 0.25° secLat RMS 0.2° RMS 0.5°/min plus 5% of the indicated rate of turn General data Permissible ambient temperature – Operation - 20° C to +60° C - 40° C to +70° C – Storage – Settling time 1h – Permissible roll and pitch angle for full accuracy ±60° Supply voltage & power consumption – 24 V DC (10 – 36 V DC) – 24 W Accuracy – Heading – Roll & pitch – Rate of turn – secLat.=1/cosLatitude Data interfaces Standard 30 MF – 3x RS422 serial inputs – 4x RS422 serial outputs (NMEA or Anschütz Course Bus) Alerts – System failure with potential-free relay contact –...

Open the catalog to page 4