Rapido 50
11Pages

General Specifications Rapido 50 Trimaran Designed and Engineered by: Rapido 50 General Specifications 10 January 2022 oaul@raoidotrimarans.com; www.rapidotrimarans.com

Rapido 50 General Specifications 10 January 2022 oaul@raoidotrimarans.com; www.rapidotrimarans.com

epoxy resin and Divinycell foam-sandwich construction. b) Hull, deck, cabin-top, beams, daggerboard and rudder parts molded from composite female tooling to reduce fairing and save weight. c) Composite parts infused to control resin content, fiber ratio and improve strength-to-weight ratio. d) Thermo-formed core from 3D templates. e) Beams, daggerboard, rudder blade & elevator, chainplate and main bulkheads: pre-preg carbon, cured in an autoclave. f) Carbon longitudinal stringers. g) Carbon structural bulkheads, chainplates, beam bulkheads, etc. h) Carbon reinforcement in high load areas:...

a) Mainsail, solent, reacher, and staysail halyards and sheets. c) Topping lift/spare main halyard. d) Lazy cradle jacks/ optional carbon Dyneema truss wing. e) Mainsail traveler lines. g) Outhaul and Cunningham lines. h) Daggerboard control lines. Sails: see separate options list a) 2 x Gioit escape hatches. b) 10 x Lewmar Atlantic Series opening portlights. c) 1 x Lewmar 70 Flush 3G deck hatch in forward cabin. d) 2 x Lewmar 70 Flush 3G cabin-top hatches. e) 2 x Lewmar 50 opening hatches in salon facing forward. f) 1 x Lewmar 70 Flush 3G opening hatch in aft cabin. g) 8 x Rapido flush...

Rapido 50 General Specifications 10 January 2022 oaul@raoidotrimarans.com; www.rapidotrimarans.com

a) Harken mainsheet and traveler systems. b) Harken self-tacking solent track system. c) Harken headsail systems. e) Harken mast rotation, Cunningham, and outhaul controls. f) Daggerboard lifting system. g) Spinlock clutches and jammers. a) 2 x Electric Harken 60 primary winches. b) 2 x Electric Harken 50 cabin-top winches. c) 2 x Harken 50 mast winch. d) 1 x Harken 46 foredeck winch. a) Lewmar anchor windlass with remote control. c) 4x 250mm Antal folding deck cleats/padeyes. d) Anchor/windlass locker forward mast base and locker for secondary anchor in foredeck. e) 24 volt Lithium ion...

Navigation Lights a) LED bow and stern navigation lights. b) LED anchor, steaming, deck lights. Engine & Propulsion a) Yanmar diesel, 3JH5E, 38.5hp, shaft drive. b) Folding 3 blade prop, Flex-O-Fold. c) 80amp alternator (starting batteries). d) Digital B instrument panel. e) Engine room insulation. f) PSS dripless seal on prop shaft. g) Ultraflex engine controls. i) Fuel tank, 300 liters. k) Auto engine room fire extinguisher. Outdoor Fitout Cockpit, transom, decks, and floats a) Hard top Bimini with sliding front screen. b) 1.2m wide helm seat/leaning post. c) Salon cockpit windows...

Interior Fitout a) All interior components lightweight cored panels. b) Cabinets: teak veneers/ solids and, where painted, satin finish. c) Lightweight composite doors. g) Storage area cabinet. h) Grohe faucet and shower set. j) Shower area with composite painted finish. k) Electric shower drain pump. m) 2 x Lewmar opening portlights. a) Lightweight composite doors. c) Double bunk (Queen size). e) Under bunk storage. f) 2 x Lewmar opening portlights. g) 1 x Lewmar 70 Flush 3G opening hatch in transom. Forward Cabin a) Lightweight composite door. c) Double bunk (Queen Size). Rapido 50...

e) Under bunk storage. f) 1 large deck hatch. g) 4 x Lewmar port lights. a) Shelves, cabinets, drawers with Blum hardware soft close and latches. c) 180 liter Virifrigo two-drawer fridge. d) Large Hafele SS sink. e) Wallas two burners, diesel stovetop and oven. f) Hot and cold pressurized freshwater. a) 1 x quick 25 liter water heater. b) 1 x 300 liter water tank. c) 1 x water pressure system pump. a) 2 x holding tanks, 60 liters each. a) 4 x electric automatic bilge pumps. b) 1 x manual bilge pump, 20 US gal-75liter/min. Single wheel, Jefa custom steering system to include: Rapido 50...

Torsion bar and universal joint complete with autopilot drive on carbon spade rudderblade and elevator manufactured from CNC-milled tooling, blade cured at elevated temperature and pressure in auto-clave. Spare spade rudderblade for shallow waters. Custom kick up rudder box with upper and lower bearings. General Specifications paul@rapidotrimarans.com; www.rapidotrimarans.com

a) High aspect ratio, swept and tapered daggerboard for good efficiency / performance. b) Carbon daggerboard manufactured from CNC-milled tooling, then cured at elevated temperature and pressure in autoclave. c) Daggerboard case structure reinforced at cabin-top, salon sole and forward / aft frames below sole, hull exit. d) Mast compression supported by daggerboard case and cabin top via cabin-top plinth. Please contact Rapido Trimarans' Co Founder and General Director, Paul Koch: • Ph (incl. WhatsApp): +84 939 040 201 • Email: paul@rapidotrimarans.com Rapido 50 General Specifications 10...