RAILBLAZA catalogue 2016
24Pages

Versatile, Easy-to-Use Mounting Systems and Accessories for Leisure and Adventure Sports on and off the Water

The RAILBLAZA StarPort is a unique and versatile mount used in a huge number of applications. The StarPort allows users to fit and swap out our full range of RAILBLAZA accessories. Made from high grade engineering plastics, the StarPort is easy to fit and stylish. It can be surface or recess mounted on power boats, inflatables, sail boats, kayaks, ATVs, garages & many other applications... • StarPorts can be horizontally or vertically mounted in minutes • Low profile surface mount & minimal intrusion depth when recess mounting • Includes a stylish locking slide for securing accessories...

CHOOSE A MOUNT RAILMOUNTS 19-25 RAILBLAZA RailMounts are simple-to-use mounts, allowing the easy attachment of RAILBLAZA accessories, and many other things. Simply screw the RailMount together onto your rail, no need to drill holes so you can easily move the RailMount to a different spot, and your rail is as good as new! The RailMount 19-25 can be mounted onto any 19 or 25mm(0.75 or 1”) rail in minutes. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws. The RailMount 32-41 is specifically designed for both...

MINIPORT TRACMOUNT Fasteners included Two applications in one. The CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Included is a unique backing plate keeping stainless fastenings isolated from aluminium decks avoiding corrosion. The MiniPort TracMount is designed to fit most existing kayak tracks, including, Wilderness Systems, Native Watercraft, Yak Gear & YakAttack. Tool-less operation allows easy fitting and adjustment by turning the MiniPort clockwise which tightens directly...

TRACPORT SERIES THE TRACPORT DASH SERIES Offers versatility and adjustability to your StarPort positioning. The TracPort Dash 350 turns one StarPort into three. TracPort Dash 500 turns two StarPorts into four. StarPorts slide to adjust in track. Extra StarPort TracMounts can be purchased separately. StarPort TracMount kit ordered separately if you need to add extra StarPorts to the Track. 03-4103-11 TracPort Dash 350 Includes 350mm (13.75”) Track with 3 StarPorts installed and 2 attachment adaptors 03-4102-11 TracPort Dash 500 Includes 500mm (19.5 “) Track with 4 StarPorts installed and 2...

RIBPORT Fitting rod holders and other accessories to RIB’s & Inflatable boats just got easier. Now you can fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB pad is now supplied with every RIBPort pack. CLEATPORT RIBMOUNT You no longer need a specialised outfitter, or to work with messy glues to install accessories to your RIB or Inflatable, with the RIBPort VHB pad you can...

With 3M VHB self adhesive pad. No glue, no fasteners, just stick it. The RAILBLAZA Rowlock adds the versatility of the RIBPort to your inflatable. Fit the Rowlock to the RIBPort ready for rowing then when not in use you can remove and stow the oar. Now you can attach any of the other RAILBLAZA accessories, like rod holders ,drink holders or mobile device holders. Fits most standard aluminium oars. Camera Mount The only hole you want in your inflatable Ideal for use on Inflatable boats, SUPs and kayaks. Will bond to PVC, hypalon, fibreglass, polyethylene, aluminium and much more. Fillet...

ROD HOLDER II The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position. • Rotating collar helps reduce ‘strike-theft’ • Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through • Fully adjustable 360° around, over 90° vertical • Easy access to reel when in position • Square-tooth adjustable tilt stops rotational slipping. The Rod Holder II is available either as a kit complete with a StarPort, or as a Rod Holder by itself. For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your...

02-4024-11 Fillet Table with platforms only 04-4024-11 Fillet Table including StarPorts and platforms FILLET TABLE When you need a bit of 'chop' on the water The 525 x 350mm (20.7x13.8in) design allows for knife storage, has an all round drain (with fitting for hose underneath) that stops spill from the front, and no front lip to get in the way while filleting (includes two adjustable platforms). Fillet Table can be raised 125mm (5in) with the addition of StarPort Extenders (as shown RHS). KAYAK/CANOE SOUNDER & TRANSDUCER MOUNT Rotates out of water when not in use The Sounder & Transducer...

DEVICE HOLDERS SCREENGRABBA These days chartplotter, sounder and even radar output can be read on popular consumer electronics. The ScreenGrabba holds your iPad, Galaxy Tab or other touchscreen firmly, even when it’s in a waterproof bag or case. 02-4045-11 ScreenGrabba ScreenGrabba + StarPort Kit • Fits 7”- 10” tablets • 250mm max tablet size • 360° rotatable • Allows portrait & landscape viewing • Over 90° tiltable • Will hold most hard & soft dry cases Mobi only Adjustable Mobi Low Profile Mobi Mobi + StarPort Kits Adjustable Mobi + StarPort Kit Low Profile Mobi + StarPort Kit MOBI MOBILE...

The E series StarPort with USB combines a USB connector within our StarPort base allowing you to 03-4080-11 Black charge your tablets , mobile phones 03-4080-21 White and many other devices. This can be achieved using our range of device holders and StowPods to hold your device while charging. The E Series USB is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. The E series DC Port socket combines a 12VDC 3A socket within our StarPort base allowing the connection of LED spotlights, cabin fans or depth sounders and many other devices. This...