Compact Sheet-Steel Emergency Light Fitting Series 6118/Series 6518 - 7 Pages

Add to MyNauticExpo favorites
Compact Sheet-Steel Emergency Light Fitting Series 6118/Series 6518

Catalog excerpts

Lighting Technology Compact Sheet-Steel Emergency Light Fitting • Electronic ballast and integral emergency light unit • Operation modes - Maintained operation - Maintained operation with switchable emergency light - Non-maintained operation • With weekly functional test • With automatic emergency light duration test • With discharge protection and charging voltage limiting • With intelligent charging • Central lock sheet-steel or in stainless steel • Glass cover can be fitted with emergency exit signs to order Series 6118 (Zone 1) and 6518 (Zones 2, 21 and 22) compact emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and painting installations as well

 Open the catalog to page 1

Compact Sheet-Steel Emergency Light Fitting Selection table Cable entries Emergency exit Specify non-standard entries in writing Shett-steel, powder-coated Stainless steel 1.4301 (AISI 316TÌ) -> state with order Needed only when used as information lights orescape sign with adhesive symbols positioned as follows: Mounting position Special Please state other positions in writing Please specify emergency exit sign number Symbols complying with VBG 125, DIN 4844, DIN 5035; recognation distance e: 45 m; size: 395 x 235 mm Colour Sign white Background green Colour Sign white Background green...

 Open the catalog to page 2

Compact Sheet-Steel Emergency Light Fitting Technical Data Explosion protection Dust explosion protection Dust explosion protection Rated voltage Rated current Back-up fuse for battery set Ambient temperature Lighting operation Protection class Central lock Light guides Cable entries applied for / Supplier's Declaration applied for / Supplier's Declaration 1 X 8 W; Two pin fluorescent lamps, 8W, 16 mm diameter, for G5 holder Electronic ballast, single channel with integral emergency light electronics Standard:Sheet-steel, powder coated, colour similar to RAL 9016 Special: Stainless steel...

 Open the catalog to page 3

Compact Sheet-Steel Emergency Light Fitting Technical Data Mounting Pendant light fitting Light fitting top has two M 8 threaded rivets which allow use of different mounting parts, Wall-mounting light fitting Each small end is fitted with one M12 threaded bolt. The light fitting is hooked-in by these bolts to the mounting brackets and secured by lock nuts. The light fitting's angle of inclination is infinitely variable. Recessed light fitting Mounting frames with fixing holes are welded-on. Light fitting is inserted into ceiling cutout and fixed via mounting frame. The frames are flush with...

 Open the catalog to page 4

Compact Sheet-Steel Emergency Light Fitting Technical Data Operation modes On delivery light fitting is wired for maintained operation; by removing the jumper between terminals 1 and 2 and connecting external switch F, the fitting is converted to maintained operation with switchable emergency lighting. External switch External switch Operating voltage Emergency exit signs Recognition distance Maintained operation On failure of supply to general lighting, fitting is supplied from the battery, irrespective of the light switch position Maintained operation with switchable emergency lighting On...

 Open the catalog to page 5

Compact Sheet-Steel Emergency Light Fitting Accessories and spare parts Designation Illustration Description Fluorescent lamps Emergency exit sign Ring bolts Colour of Light flux Adhesive foil, to stick on the glass cover Recognition distance: Colours Sign white 1 pc. Background green Colours Sign white 1 pc. Background green Colours Sign white 1 pc. Background green For light fittings width: Sheet steel 1 pair Ordering code Weight M 8, to mount directly into inserts, 1 pair Breathing gland to protect battery circuit

 Open the catalog to page 6

Compact Sheet-Steel Emergency Light Fitting Dimension drawings (all dimensions in mm) - subject to alterations Pendant light fitting Emergency exit sign Recessed light fitting Mounting cut-out Wall-mounting light fitting Compact sheet-steel emergency light fitting 6118 and 6518 Wall-mounting bracket We reserve the right to make alterations to the technical data, weights, dimensions, designs and products available without notice. The illustrations cannot be considered binding.

 Open the catalog to page 7

All R. STAHL Schaltgeräte catalogs and brochures

  1. SERIES 200

    8 Pages

  2. HMI Overview

    36 Pages

  3. Polar Zone

    12 Pages

  4. SolConeX

    12 Pages

  5. GUBox

    4 Pages

  6. EXLUX 6001

    4 Pages

  7. Lighting

    16 Pages

  8. Flyer FX15

    4 Pages

Archived catalogs