R&M Wet units
8Pages

R&M Wet Units Alongside functional and welcoming environments in cabins and communal rooms, highquality wet units are also a key requirement in modern ship design. The standard has been set by a program that can be used on vessels and offshore facilities of all types. R&M produces and provides sound and fire-proof wet units designed to meet individual needs: complete with washbasins, toilets, heating, tiling, mirrors, shower areas with a glass partition or curtains, bathroom accessories, safety rails and full installation of fresh, gray and black water piping as well as electrical installation inside. The use of self-contained prefabricated modules is often the best solution when installation time on board is limited, when outfitting is very tightly concentrated and high quality is needed. The prefabricated wet unit is a good alternative for cost-saving and increasing recurrent quality. All individual modifications, outfitting and optional combinations are always available upon request. All prefabricated wet units are readily transportable and can be promptly supplied “just in time”.

Prefabricated wet units – key data Passenger and crew wet units to meet individual standards Fire integrity B-15 construction with high attenuation properties Stainless steel, aluminum or preserved black steel with Bolidt floor, epoxy covering, PU covering or tile covering Sandwich construction with PVC foil covering in various patterns, or steel construction with outside insulation and tiling or synthetic material surfaces from inside, if necessary the panel behind the toilet bowl can be equipped with an inspection hatch for access to the vacuum technology from inside Sandwich construction...

2 Door frame with connection profiles for incorporating the cabin wall system. 3 Wall panels screwed together for obtaining blocksheaving stability. Panels are made of PVC-coated steel sheets for inside (of wet unit) and galvanized steel sheets for back side (outside of wet unit). 4 Corner profile made of galvanized steel for a strong connecting of the wall blocksheaves. 5 Ceiling panel with a thickness of 30 mm. All cables and cut outs are covered by a special insulation on top. 6 Exhaust air diffuser. 7 Piping system for fresh water made of copper or plastic pipes. 8 Toilet bowl – gravity...

The standard types of R&M Wet Units Standard wet unit with washbasin and toilet bowl. Standard wet unit with washbasin and toilet bowl, door position crosswise. Standard wet unit with washbasin, toilet bowl and shower area separated by a shower curtain. Standard wet unit with washbasin, toilet bowl and shower area separated by a shower curtain, door position crosswise. Standard wet unit with washbasin, toilet bowl and shower area separated by a shower curtain. Standard wet unit with washbasin, toilet bowl and shower area separated by a shower curtain, door position crosswise. The interiors...

The standard types of R&M Wet Units Standard wet unit with washbasin, toilet bowl and bathtub separated by a shower curtain, door position crosswise. Standard wet unit with washbasin, toilet bowl and bathtub separated by a shower curtain. Standard wet unit with washbasin, toilet bowl and shower area separated by a shower curtain. The interiors of wet units can be adapted to the architect’s specific requirements.

Assembly of standard wet units The prefabricated wet units are fully assembled outside the vessel. This combines a lot of advantages such as: customers benefit from cost-effective series manufacturing, short delivery and assembly times, simple and time-saving installation on board and consistently high quality.

Assembly of standard wet units The prefabricated wet units are fully assembled outside the vessel. This combines a lot of advantages such as: customers benefit from cost-effective series manufacturing, short delivery and assembly times, simple and time-saving installation on board and consistently high quality.