R&M_Floor_Systems_en
8Pages

{{requestButtons}}

Catalog excerpts

R&M_Floor_Systems_en - 1

floor systems_2010.qxp:floor systems 26.05.2010 8:01 Uhr Seite 1 R&M Floor Systems Compact: R&M Floor Systems The demands on floors are very high, and they are met in all essential respects with our floor systems. Thus, the floating floor version on board ships is available in form of floor panels and a combined system of screed plates and insulation plates. Apart from their rapid and compact laying, they also meet the requirements of the noise control and fire protection regulations.

Open the catalog to page 1
R&M_Floor_Systems_en - 2

floor systems_2010.qxp:floor systems 26.05.2010 8:01 Uhr Seite 3 R&M Floor Systems Type Outer layer Current fire classification Mass per area Floating floor A-60 Steel A-60 35.3 kg/m² Floating floor C class Steel C 32.3 kg/m² EPSI® Screed plates A-60 56.0 – 65.0 kg/m² In order to guarantee our customers maximum safety, all our products are tested in accordance with international guidelines. Certification forms an important part of our quality management system. Please do not hesitate to contact us if you have any questions on current certificates or, alternatively, visit our website at...

Open the catalog to page 2
R&M_Floor_Systems_en - 3

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 5 Floating floor A-60 Similar to image Floating floor A-60 Similar to image 06_10 engl. The design of the floating floor A-60 comprises aligned individual panels. Thanks to the A-60 fire classification and excellent soundproofing, this floor system can be used throughout the ship and, as such, satisfies all the demands placed on modern ship flooring. To install, after being laid down, the panels are spot welded. The flooring is then finished with further coating elements. The design of the A-60 floor panel and all components...

Open the catalog to page 3
R&M_Floor_Systems_en - 4

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 6 Floating floor A-60 Floor Systems Floating floor A-60 Floating floor A-60 Floating floor A-60 Technical data A-60 Element width 600 mm Element length 1200 and 2400 mm Thickness 73 mm Mass per area – panel 35.3 kg/m² Density of insulation material 150 kg/m3 Certification EC, USCG, RMRS 06_10 engl. Fire classification

Open the catalog to page 4
R&M_Floor_Systems_en - 5

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 7 Floating floor C class Similar to image Floating floor C class Similar to image 06_10 engl. The C class floating floor can be used in all areas where international regulations do not demand compliance with fire classification A or B. The design of the flooring, with its individual panels, is based on the floating floor A-60 yet with the difference that the insulation below the steel deck layer is less thick. To install, after being laid down, the panels are spot welded. The flooring is then finished with further coating...

Open the catalog to page 5
R&M_Floor_Systems_en - 6

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 8 Floating floor C class Floor Systems Floating floor C class Floating floor C class Floating floor C class Technical data C Element width 600 mm Element length 1200 and 2400 mm Thickness 53 mm Mass per area – panel 32.3 kg/m² Density of insulation material 150 kg/m3 Certification n/a 06_10 engl. Fire classification

Open the catalog to page 6
R&M_Floor_Systems_en - 7

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 9 EPSI® – Screed plate floating insulation Similar to image 06_10 engl. The floating floor EPSI® developed by R&M with fire classification A-60 satisfies the most stringent fire insulation requirements and, as such, can be used anywhere on the ship. Unlike traditional concrete fire insulation systems, the EPSI® floor has a very quick cure time of just approx. 24 hours and a quick laying time of 2 – 4 m²/h. In addition, tests have confirmed the system’s very good soundproofing properties. Further highlights are its resistance to...

Open the catalog to page 7
R&M_Floor_Systems_en - 8

floor systems_2010.qxp:floor systems 01.06.2010 20:50 Uhr Seite 10 Floor Systems EPSI® – Screed plate floating insulation EPSI® – Screed plate floating insulation EPSI® – Screed plate floating insulation Technical data A-60 Element width 333 mm Element length 333 mm Thickness 60 – 120 mm Mass per area – panel 56 – 65 kg/m² Density of insulation material 150 kg/m3 Certification EC, USCG 06_10 engl. Fire classification

Open the catalog to page 8

All R&M Marine Products catalogs and brochures

  1. R&M_Others_en

    18 Pages

Archived catalogs