CONNECT C4S OUTFITTING SYSTEM
9Pages

CONNECT C4S OUTFITTING INSTRUCTIONS

CONNECT C4S OUTFITTING SYSTEM Greater Under Thigh Support maximises the performance of the kayak and of the paddler. Backrest Attachment Moves with Seat 4 Way Seat Adjustment As the main area of contact between paddler, boat and water, and the key to good posture and performance, it is essential to get the position of your seat right. [Tools required] 4mm Allen Key Pozi No. 3 Screwdriver Sharp Knife Sandpaper The long, ergonomically shaped seat has 4 points of adjustment; Front to Back, Height, Rake and Backrest support. Each one can be easily personalised, then fixed to give a secure and...

Front and Back Seat Adjustment Moving the seat forwards and backwards shifts your weight and the way the boat sits in the water, this is called the trim. When floating the boat should be balanced, with equal amounts clear at each end, this ensures it will perform the way it was designed to. The ideal trim will vary depending on your weight, how long your legs are and how much kit you plan to carry so you may need to adjust your seat if you are loading up for a long trip. the wing nuts have not come loose, especially after a long drive. Tool-less adjustment gives 90mm of travel front [a]...

Seat Rake Adjustment Rake: Pivoting the seat allows the paddler to engage or relax their knees and thighs with the deck while keeping in contact with the whole seat. Reducing the space between seat and thigh grip can make paddlers feel more secure and connected to the boat and gives extra control. Extreme: The bottom hole will pivot the seat to its highest setting, this may be good for freestyle or racing where an aggressive stance is desired. Active paddling posture is a personal preference and will depend on your body shape and style of paddling. If the rake is too aggressive paddlers may...

Thigh Grip Adjustment Replace Connect thigh grips can be moved forward and back to fit the curvature of your legs. [Tools required] Pozi No. 3 Screwdriver [a] Remove the bolts situated on the top of the cockpit rim and loosen the bolts on the side of the cockpit rim. [NOTE] To achieve the best possible fit the thigh grips should be moved as close to the paddler as comfort allows. However do not impede an easy and free exit from the boat. [b] Loosen off the ratchet back band by pulling on the red release buckle on the thigh grip whilst putting pressure on the back band. [c] Slide the thigh...

Shoc Block Footrest Play kayaks come with shoc block footrests, shape and styles may vary to illustration, please use these instructions as a general guide. [CAUTION] Only cut off the foam in small amounts until the desired fitting is achieved. [NOTE] Pyranha recommend that the foam shoc block is a little larger than required as the foam will compress slightly over time. Type 1 [a] Remove the foam block from the kit bag and place in the bow of the kayak. [b] Test your foot position. If you need to alter the size of the foam block follow the instructions in step [c] if not skip to [d]. [c]...

Full Plate Footrest Support Plate River / Creek kayaks come with a full plate footrest, actual pack contents may differ from that shown in the illustrations, please use as a general guide. [NOTE] Some bending of the metal bars may be required if you need to remove the footrest from the kayak. [a] Remove the four thumb screws and star washers situated on the footrest bars in the bow of the kayak. [b] Move the footrest to the desired position and replace the four thumb wheels and star washers. [Hand tighten only]. [c] If your footrest is fitted with a support plate and you need to move it...

Features & Safety Connect C4S is a solid, reliable and durable system that adds significantly to the structure of the kayak, here are some key safety features that are designed to protect you whilst out on the water. The little extras that are part of Connect, like gear straps and loops help you to secure essential kit and safety gear into the kayak. Pillar Standard in all Connect kayaks the pillar aids easy carrying, gives structural support for the deck and allows a step out point in a pin situation. [CAUTION] Remove all packaging material from the kayak. Take care not to damage or scratch...

If you require further assistance contact your local Pyranha dealer or visit pyranha.com. Lost or broken parts? Replacement parts for Connect C4S are available from your local Pyranha dealer.