PureWater Das Trinkwasser aus dem Meer Desalination System for Sea Water, Brackish Water and cleaning of Fresh Water S- 60 = 60 Liter/h +/-10% S -90 = 90 Liter/h +/-10% (Depends on Sea Water Temperature and Salinity ) 35000 ppm.* The heart of the system is the ETD (Energy Transfer Device) The ETD produces out of large volume water with low pressure, High pressure, with a low volume of water. The built in Energy recovery circuit pushes the ETD and saves energy by using the concentrate back flow. The advantage of this system is: The system produces almost no noise. No high pressure regulation is needed, the system regulates by itself. It is a switch On/Off system. New ceramic parts extend the time between overhaul. More Water is pumped through the membrane which extends membrane life and increases water quality. ppm (parts per million TDS= Total dissolved solids.

PureWater^Das Trinkwasser aus dem Meer Membrane Pre-Filter Connection sizes Concentrate Flow Voltage Weight Water Qualityl Pre-Filter 5p with expansion Tank %“ hose connection. Feed Pump must be at or below the waterline %“ hose connection. Outlet must be over the Waterline. S - 60 = 12V 29A, 24 V 14,6A 230V 1,6A S - 90 = 12V 45A, 24V 22,5A 230V 2,4A ca. 45 Kg. In Sea Water less than 500PPM. Below WHO Standard Ready to install. Membranes, Pre-Filter, Feed Pump, Freshwater Flush System, ETD, Control Panel. Warranty Extras 2 Years on the system, unlimited warranty on the pressure vessel. Spare...