Catalogs >
PSM Instrumentation >
HCG-Contents-Gauge

HCG-Contents-Gauge
4Pages

Catalog excerpts

HCG Self Powered Hydrostatic Contents Gauge Stainless steel sensor construction ensures compatibility with common marine fluids such as fuel oil, seawater and bilge waste. Robust construction provides reliable operation with no requirements for routine calibration or service. A range of sensor mounting options, dial sizes & calibration markings and capillary lengths. product group Simple to install with factory calibration for each application. Self powered with no requirements for electrical or pneumatic power. Type approved for marine duty by the BV and DNV marine approval authorities and safe for installation in zone 0 flammable hazard areas. © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 11a 10/01/2013 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 1

The HCG series self powered hydrostatic contents gauge requires no external power source for operation and gives a continuous readout of the contents within a tank without the aid of batteries or hand pumps. HCG contents gauges are constructed with 316 stainless steel diaphragm, stainless steel or mild steel diaphragm sensor housing, a PVC sheathed copper micro bore pressure capillary and stainless steel indicator gauge. Displacement of this diaphragm due to applied hydrostatic pressure is transferred via an inert gas filled capillary to the remotely positioned indicator. Each indicator is...

Open the catalog to page 2

Specifications Mounting type Indicator gauge size Scale markings According to customer application Operating temperature range Environmental protection Sensor IP68. Gauge dial IP65 Length of capillary tube According to customer application (Max 20m) Dimensions and sensor installation © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 11a 10/01/2013 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 3

Model Coding Model code 7 positions (ex: ES / X / 160 / W / S / 3 / P) 1. Sensor mounting Internal tank mounting with fixing bracket External mounting DN80 PN16 flange Internal tank mounting with pole and DN125 flange External mounting 3/4” BSP running nut Specify according to application in metres water gauge 3. Indicator gauge diameter 100mm 160 mm 250 mm (wall mounting only) 4. Indicator gauge mounting Wall mount via integral back plate Panel mount via included clamp 5. Diaphragm sensor housing material (Note: diaphragm and indicator are always stainless steel) Stainless Steel Mild Steel...

Open the catalog to page 4

HCG-Contents-Gauge 4Pages

Catalog excerpts

All PSM Instrumentation catalogs and brochures

HCG-Contents-Gauge
4Pages