Catalogs >
PSM Instrumentation >
DAT 40g BLS 9200

DAT 40g BLS 9200
1 / 4Pages

Catalog excerpts

BLS 9200 Bilge Level Switch Simple installation via integral mounting bracket Fully submersible IP68 construction with cable resistant to marine applications Stainless steel slosh and debris protection shield Marine type approved product group Compact design Rugged all-stainless steel design ensures reliable operation Integral switch test lever © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 40g 06/09/2013 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 1

BLS 9200 level switch for liquid detection in bilges, voids and sumps Bilge level switches are a safety critical component for the detection of liquid in dead spaces, voids and sumps that are rarely visited or inspected by the crew. They need to be able to withstand years of installation in difficult environmental conditions, yet operate immediately and reliably should a rising liquid level indicate a leakage or flooding hazard. When considering these products it would be easy for a ship builder or owner to try and make economies by using cheaper devices, often constructed with poor quality...

Open the catalog to page 2

Specifications Material of construction Stainless steel stem, float, test mechanism, body plates & slosh shield Marine grade EPR Insulated with LSZH elastomeric type SW4 sheath, 3 -core with polyolefin boot Cable length 2m as standard. Other lengths optional Process Temperature Switch type S.P.C.O. reed switch Electrical rating - maximum 100 VA resistive load (maximum 500 V DC or 250 V AC at 3A) Electrical rating - minimum 3W (to prevent long-term switch contact material activation) © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 40g 06/09/2013 PSM Instrumentation Ltd, Unit 3 Burrell Road,...

Open the catalog to page 3

GA drawing Sealed and booted cable exit Manual test lever Mounting holes 2 x 9mm dia Protective slosh tube Typical actuation point SG Dependant 51 GA drawing (optional termination enclosure) 2 x Bilge Switch Inputs © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 40g 06/09/2013 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 4

DAT 40g BLS 9200 1 / 4Pages

Catalog excerpts

All PSM Instrumentation catalogs and brochures

DAT 40g BLS 9200
1 / 4Pages