1. Catalogs
  2. PSM Instrumentation
  3. DAT-30f-RFM-field-termination-and-barrier-modules

DAT-30f-RFM-field-termination-and-barrier-modules

DAT-30f-RFM-field-termination-and-barrier-modules

DAT-30f-RFM-field-termination-and-barrier-modules

Product catalog summary
Overview: The document provides technical details about the RFM series Field Termination and Intrinsic Safety Barrier Modules, designed for use with PSM ict 1000 smart hydrostatic level transmitters. These modules facilitate network connections and ensure compliance with ATEX Intrinsic Safety standards.
Key Features:
  • Modular system that reduces the cost of power, signal, and data wiring loops.
  • Available in lightweight aluminium for below deck or painted steel for above deck mounting.
Installation and Configuration:
  • RFM series simplifies the installation of ict 1000 transmitters, offering configurations from simple termination boxes to fully approved barrier systems for hazardous areas.
  • Housings are IP67 rated, with cable entry via 6 x M20 glands and vented through waterproof sintered vent plugs.
RFM-1 & RFM-4 Modules:
  • Provide termination points for power and digital signal cabling, allowing for "pass-through" connections.
  • Enable digital multi-drop communication, reducing the need for extensive cabling compared to conventional 4-20mA loops.
  • Can be used in hazardous areas when combined with RFM-ISR modules.
RFM-ISR Module:
  • Offers intrinsically safe power and Modbus data transmission using zener barriers.
  • Supports power supplies between 15 to 35V DC and protects up to 105 ict 1000 transmitters.
Benefits of Using RFM & RFM-ISR Modules:
  • Simplifies installation by replacing multiple power and analogue signal loops with a single cable.
  • Reduces build costs by eliminating the need for copper cables and junction boxes.
  • Facilitates easy commissioning with accessible transmitter configuration and diagnostics.
  • Decreases weight, enhancing ship operational efficiency.
Application Example: The document compares a multi-tank installation using analogue versus Modbus digital communications, highlighting the efficiency and cost-effectiveness of the latter.
See more

Catalog excerpts

DAT-30f-RFM-field-termination-and-barrier-modules-1

T: +44 (0)1444 410040 E: [email protected] www.psmmarine.com RFM series Field Termination and Instrinsic Safety Barrier Modules Key features product group Flexible and modular system simplifies and reduces the cost of power, signal and data wiring loops Part of the Field termination and intrinsic safety barrier modules for use with PSM ict 1000 smart hydrostatic level transmitters Lightweight aluminium (below deck mounting) or painted steel construction (above deck mounting) © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 30f 15/11/2011 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

 Open the catalog to page 1
DAT-30f-RFM-field-termination-and-barrier-modules-2

hydrostatic pressure transmitters The RFM series is used with PSM ict 1000 smart hydrostatic level transmitters to provide both simple multi-drop network connections and full compliance with ATEX Intrinsic Safety standards where required. RFM is offered with various configurations from simple termination boxes to fully approval barrier systems for use in hazardous area Housings are either offered in a lightweight IP67 aluminium enclosure for below deck mounting, or a rugged IP67 steel enclosure suitable for harsh environments or open deck Cable entry is via 6 x M20 glands and the housing is vented...

 Open the catalog to page 2
DAT-30f-RFM-field-termination-and-barrier-modules-3

Application example: comparison of a multi-tank installation using analogue vs. Modbus digital communications Multiple Barriers Conventional Analogue System Each sensor needs a cable and barrier Single Barrier Module with direct digital connection to Display One barrier and cable loop for all sensors RFM I-|RFM |-|RFM1-|RFM |-|RFM~|-|RFMJ-|RFM~1-1RFM I—I RFM~|-|RFM |-|RFM Using ict 1000 smart hyrostatic level transmitters connected with RFM & RFM-ISR modules to a TankView 2000 control and display system using Modbus digital communications provides the following benefilts: • Simple installation...

 Open the catalog to page 3
DAT-30f-RFM-field-termination-and-barrier-modules-4

GA drawing (epoxy coated cast aluminium enclosure) Cable Glands GA drawing (painted mild steel enclosure) PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.