1. Catalogs
  2. PSM Instrumentation
  3. DAT-25g-BulkSafe-system

DAT-25g-BulkSafe-system

DAT-25g-BulkSafe-system

DAT-25g-BulkSafe-system

Product catalog summary
Overview
The BulkSafe Water Ingress Detection System is designed for bulk carriers, ship holds, and void spaces. It is type-approved according to SOLAS regulations and is simple to install and operate, requiring only one sensor per hold. The system ensures operational health through constant self-checking and interfaces with ship data recording systems.

Specifications
The system is type-approved in accordance with SOLAS XII Regulation 12 and SOLAS Chapter II-1 Part B Regulation 23-3. It complies with IMO performance standards and has been tested by major classification societies, receiving approvals from DNV, BV, ABS, and CCS.

Installation and Operation
The system is designed for easy installation with a variety of sensor fitting options. It requires minimal cabling, and PSM provides installation drawings. The system is user-friendly, featuring a backlit LCD display and function buttons for quick access to system tests and status indications.

Alarm and Monitoring
Alarm conditions can trigger internal relays for external alarms. Repeater displays can be added for remote status indication. The system can output alarm status messages to the ship's Voyage Data Recorder in accordance with BS-EN61162.

Compliance and Power Supply
Sensors can be disabled for ballast use, and the system automatically switches to the ship's emergency power supply if needed. It includes mechanisms for comprehensive operational health checks without entering the hold.

General Specifications
The IWR 4200 Central Monitor features an IP65 epoxy-coated steel body, backlit LCD display, and operates on 110/220 V AC or 24 V DC. The Tankstar 260 sensor is IP68 rated, made of stainless steel, and includes a remote amplifier module suitable for deck mounting.

System Components
Components include the IWT 4200 Central Monitor, optional remote displays, sensor transmitters, and test modules. The TankStar 260 sensors are mounted on the side of the hold or in a stilling pipe.
See more

Catalog excerpts

DAT-25g-BulkSafe-system-1

BulkSafe Water Ingress Detection System for Bulk Carriers, Ship's Holds and Void Spaces Part of the BulkSafe product group PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK • Type approved in accordance with SOLAS XII Regulation 12 for bulk carrier cargo holds • Type approved in accordance with SOLAS Chapter 11-1 Part B Regulation 23-3 for single hold cargo ships and void spaces • Simple to install and operate with only one sensor required per hold • Sensors can be tested from the deck with the holds filled and no external tooling or services required • Constant self-checking of detection sensors and 'live zero' alarm signal confirms system operational health • Interfaces with ship data recording Subject to change without notice

 Open the catalog to page 1
DAT-25g-BulkSafe-system-2

BulkSafe hold and void space water ingress detection and alarm monitoring systems for bulk carriers and single hold cargo ships PSM BulkSafe is an essential cargo hold water ingress detecting system designed specifically for cargo hold flood detection. BulkSafe draws upon PSM's comprehensive expertise and ex- perience in supplying monitoring and alarm systems for shipboard liquid levels to provide a robust, reliable, simple to install and operate solution for this critical water ingress detection BulkSafe - Water Ingress Detection System (WIDS): Ship's hold water ingress detection system (WIDS)...

 Open the catalog to page 2
DAT-25g-BulkSafe-system-3

Sensor and system operation may be checked at any time irrespective of hold status by using a simple test mechanism built into the deck termination enclosure. No additional compressed air or water services are needed to carry out this test. Alarm Outputs Alarm conditions can also trigger an optional internal relay card which may be used to control external remote mounted audible and visual annunciations. If required one or more repeater displays can be added. These are also connected to the internal relays in the primary display to provide a remote indication of the system status. Output To Ship's...

 Open the catalog to page 3
DAT-25g-BulkSafe-system-4

Typical system components Central Monitor, Control and Alarm Panel Remote mounted audible and visual alarms Ship's Voyage Data Recorder Optional remote mounted repeater Sensor transmitter and test Above deck Ships hold level sensors mounted on side of hold or in stilling pipe PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.