*mynauticexpo

Catalogs
PSM Instrumentation
DAT-14i-290-Mud-density-meter

DAT-14i-290-Mud-density-meter

Product catalog summary

Overview: The document provides technical specifications and features of the 290 Density Transmitter designed for drilling mud and slurry applications in the oil and gas industry. It highlights the transmitter's suitability for both onshore and offshore environments.

Key Features:

Designed for installation in recirculation and storage tanks.
Simple pole-mounting installation from the top of the tank.
Remote transmitter installation suitable for hazardous areas.
Robust construction with stainless steel cage protection for sensors.
Temperature compensated measurement with low thermal sensitivity.

Specifications:

Sensor Construction: 316L stainless steel body with Hastelloy C276 diaphragms.
Mounting: Submersed in tank.
Standard Range: Calibration from 6.67 to 20 Pounds/US Gallon (0.8 to 2.4 SG).
Operating Temperature: -10 to +80°C.
Hazardous Area Rating: EEx ia IIC T6 (optional).

Amplifier Module:

Construction: Wall mount GRP enclosure.
Enclosure Rating: IP65 (IP67 option) / NEMA 4X.
Power Supply: 12 to 35 Vdc.
Signal Output: 4 to 20 mA dc, 2 wire.

Performance:

Accuracy: +/- 0.25% of set span.
Temperature Coefficient: +/- 0.02% set span/°C.

Catalog excerpts

290 Density Transmitter for Drilling Density transmitter for drilling mud and slurry designed to be installed in recirculation and storage tanks Simple and flexible pole-mounting installation from the top-of-tank Remote transmitter suitable for installation in hazardous area Robust and reliable construction for arduous duty Sensors protected by stainless steel cage removable for cleaning Temperature compensated measurement with low thermal PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW, UK Subject to change without notice

Open the catalog to page 1

Mud and Slurry Density Transmitter series as a mud and slurry density transmitter specifically for use in the onshore and offshore oil and gas market. It is the first fluid density transmitter that is fully submersible for use in drilling mud and fluid circulation tanks. This density transmitter is rugged yet accurate, providing reliable measurement of the density or specific gravity in drilling mud holding tanks The 290 Series transmitter measures density as a function of differential pressure. Each unit has two pressure sensitive diaphragms mechanically separated by a fixed distance on a mounting...

Open the catalog to page 2

System drawing Pole adaptor location pocket (customer supply) Sensor input Sensor cable cable gland. Diaphragm Mount PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 3

DAT-14i-290-Mud-density-meter

DAT-14i-290-Mud-density-meter

Catalog excerpts

All PSM Instrumentation catalogs and brochures