Catalogs >
PSM Instrumentation >
DAT 12a KD FLG

DAT 12a KD FLG
4Pages

Catalog excerpts

KD-FLG Flat (Transparent) Glass Level Gauge Ideal for use in interface measurement such as fuel + water or bilge waste + water. Wide range of process connections, connection centres, valve options and scale graduations . Stainless steel, marine bronze and borosilicate glass construction ensures compatibility with common marine fluids such as fuel oil and bilge waste. product group Suitable for opaque fluids such as fuel oil or lubricating oil. Direct measurement of liquid levels in the tank under process temperature and pressure conditions. Designed, constructed and type approved for marine duty by the BV certifying authority. © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 12a 30/11/2012 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 1

Flat (Transparent) Glass Level Gauges Are constructed using a completely transparent glass (without reflex markings) with a reflective layer behind. The liquid level is viewed against this background. Flat glass level gauges are used when the liquid is opaque (blocks lights). They are also commonly used for measuring the levels in a liquid + liquid interface. They are suitable for low pressure applications with fluids such as fuel oil or lubricating oil. They are not to be used for water or steam + water interface level measurements; choose PSM’s KD-RLG Reflex Glass Level Gauge for these...

Open the catalog to page 2

Specifications Mounting type DIN / ANSI / JIS flange with integral support for longer gauge heights Top & bottom connection block: marine bronze Front & rear channel: 304 stainless steel Glass: Borosilicate Scale: marine bronze Process connections centre - to- centre Process connection type DIN / ANSI / JIS flange. Optional top vent tube. Maximum operating pressure Maximum operating temperature 120’C. 60‘C (for flammable liquids such as fuel oil) Model code options Model code (ex: KD FLG DN25 PN25 / 1000 / B DN25 PN25 / X) 1. Bottom process connection Customer specified DIN pattern flange...

Open the catalog to page 3

Dimensions and connection options © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 12a 30/11/2012 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 4

DAT 12a KD FLG 4Pages

Catalog excerpts

All PSM Instrumentation catalogs and brochures

DAT 12a KD FLG
4Pages